【24h】

Design of wideband microstrip antenna with parasitic element for 4G/LTE application

机译:4G / LTE应用中带有寄生元件的宽带微带天线设计

获取原文
获取原文并翻译 | 示例

摘要

This paper discuses the design of wideband microstrip antenna which is for mobile communication especially for 4G/LTE application. The 4G/LTE applications use frequency bands 850 MHz, 900 MHz, 1800 MHz, and 2300 MHz. Therefore, an alternative to support all these bands in one antenna is to design a wideband antenna. To achieve the antenna specification that has the characteristics of wideband, one of the methods that can be used is to add parasitic elements in a rectangular microstrip patch antenna. The antenna design uses FR4 substrate with a dielectric constant of 4.6 and substrate thickness 1.6mm. Ground plane, feed line, patch and parasitic elements using copper material with a thickness of 0.035mm. By using this technique, frequency band is obtained at 793.66 MHz up to 2501.34 MHz and have a bandwidth of 1707.64MHz. Approaching omnidirectional radiation pattern is obtained at the frequency of 850-900 MHz and significant changes in the 1800-2300 MHz frequency. Gain increases with increasing operating frequency. The highest gain in the range of 1800-2000 MHz is 4.47 dB. With the characteristics of this antenna, the result of the antenna design can be used for 4G/LTE application.
机译:本文讨论了用于移动通信的宽带微带天线的设计,尤其是4G / LTE应用。 4G / LTE应用使用850 MHz,900 MHz,1800 MHz和2300 MHz频段。因此,在一个天线中支持所有这些频带的替代方法是设计宽带天线。为了获得具有宽带特性的天线规格,可以使用的方法之一是在矩形微带贴片天线中添加寄生元件。天线设计使用介电常数为4.6,基板厚度为1.6mm的FR4基板。使用厚度为0.035mm的铜材料接地平面,馈线,跳线和寄生元件。通过使用此技术,可以在高达2501.34 MHz的793.66 MHz处获得频带,并具有1707.64MHz的带宽。在850-900 MHz的频率处获得了接近的全向辐射方向图,而在1800-2300 MHz的频率处发生了显着变化。增益随着工作频率的增加而增加。 1800-2000 MHz范围内的最高增益为4.47 dB。凭借该天线的特性,天线设计的结果可用于4G / LTE应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号