Tensile Properties of 12 Cold-Worked Type 316 Stainless Steel Irradiated in EBR-II Under Lower-Dose-Rate Conditions to High Fluence

机译：在低剂量率条件下以高通量在EBR-II中辐照的12％冷加工316型316不锈钢的拉伸性能

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

The effects of lower-dose-rate irradiation on the tensile properties of 12% cold-worked type 316 stainless steel hexagonal ducts which were irradiated in the outer rows of EBR-II were investigated. Tension tests were conducted on a total of seventeen irradiation conditions. Fractographic examinations were performed on four irradiation conditions which were selected based on the results of tension tests. The results of the tension tests and fractographic examinations showed that the 316 stainless steel hexagonal ducts exhibited irradiation hardening typical to 316 stainless steels irradiated at similar temperatures and retained respectable ductility after the irradiation. There was no significant effect of dose rate on tensile properties for the range of irradiation conditions of this study.

机译：研究了低剂量率辐照对辐照在EBR-II外排的12％冷加工型316不锈钢六角形管道的拉伸性能的影响。在总共十七种辐照条件下进行了拉伸试验。在基于张力测试结果选择的四种辐照条件下进行了断口扫描。拉伸试验和分形检查的结果表明，与在相同温度下辐照的316不锈钢相比，316不锈钢六角形风管表现出典型的辐照硬化，并且在辐照后保持了可观的延展性。在本研究的照射条件范围内，剂量率对拉伸性能没有显着影响。

著录项

来源
《20th International Symposium on Effects of Radiation on Materials, Jun 6-8, 2000, Williamsburg, Virginia》|2000年|p.469-486|共18页
会议地点 Willamsburg(GB)
作者
Tsunemitsu Yoshitake; Takako Donomae; Shunji Mizuta; Hanchung Tsai; Robert V. Strain; Todd R. Allen; James I. Cole;
展开▼
作者单位

Japan Nuclear Cycle Development Institute, 4002 Narita-cho, Oarai-machi, Ibaraki 311-1393, Japan;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类原子能技术;
关键词
12 cold-worked type 316 stainless steel; tensile properties; strength; ductility; failure mode; EBR-II reflector duct; lower-dose-rate irradiation; fast reactor core material;

机译：12％316型冷加工不锈钢；拉伸性能强度;延展性故障模式; EBR-II反射管；低剂量照射；快堆堆芯材料;

相似文献

外文文献
中文文献
专利

1. Acceleration of nickel diffusion by high tensile stress in cold-worked type 316 stainless steel at 450°C [J] . Koji Arioka, Yoshiaki Iijima, Motoki Miyamoto Philosophical magazine: structure and properties of condensed matter . 2018,第25a30期

机译：在450°C下通过冷工型316不锈钢的高拉伸应力加速镍扩散
2. THE EFFECT OF HOLD-TIMES ON THE FATIGUE LIFE OF 20-PERCENT COLD-WORKED TYPE 316L STAINLESS STEEL UNDER DEUTERON IRRADIATION [J] . Scholz R. Journal of Nuclear Materials: Materials Aspects of Fission and Fusion . 1995,第3期

机译：保持时间对氘辐照下20％冷作316L不锈钢的疲劳寿命的影响
3. In-situ SCC observation of thermally-sensitized and cold-worked type 304 stainless steel irradiated to a neutron fluence of 1 x 10~(25) n/m~2 [J] . Junichi Nakano, Yoshiyuki Nemoto, Yukio Miwa, Journal of Nuclear Materials: Materials Aspects of Fission and Fusion . 2009,第Null期

机译：热敏冷加工304不锈钢的中子注量为1 x 10〜（25）n / m〜2的原位SCC观察
4. Tensile Properties of 12 Cold-Worked Type 316 Stainless Steel Irradiated in EBR-II Under Lower-Dose-Rate Conditions to High Fluence [C] . Tsunemitsu Yoshitake, Takako Donomae, Shunji Mizuta, Symposium on effects of radiation on materials . 2001

机译：在较低剂量条件下，在EBR-II中照射12％冷水型316不锈钢的拉伸性能至高流量
5. The effect of boron content, temperature, and neutron fluence on the mechanical properties of the modified type 304 stainless steels with boron. [D] . He, Jianhui. 1995

机译：硼含量，温度和中子注量对含硼改性304不锈钢力学性能的影响。
6. Impact of the Allowed Compositional Range of Additively Manufactured 316L Stainless Steel on Processability and Material Properties [O] . Felix Großwendt, Louis Becker, Arne Röttger, 2021

机译：允许制造的316L不锈钢的允许组成范围对加工性和材料性能的影响
7. The Effect of Low Dose Rate Irradiation on the Swelling of 12 Cold-Worked 316 Stainless Steel [O] . T. R. Allen, J. I. Cole, H. Tsai, 2013

机译：低剂量率辐照对12％冷轧316不锈钢溶胀的影响
8. Tensile Properties and Swelling of 20%-Cold-Worked Type 316 Stainless Steel Irradiated in HFIR [R] . Klueh, R. L., Grossbeck, M. L. 1984

机译：HFIR辐照20％-Cold型316不锈钢的拉伸性能和膨胀性

Tensile Properties of 12 Cold-Worked Type 316 Stainless Steel Irradiated in EBR-II Under Lower-Dose-Rate Conditions to High Fluence

摘要

著录项

相似文献

相关主题

期刊订阅