• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>第四届发展中国国家连铸国际会议（The 4th International Conference on Continues Casting of Steel in Developing Countries） >Next Generation Thin Slab Caster Developed by Danieli for POSCO CEM Project
【24h】

Next Generation Thin Slab Caster Developed by Danieli for POSCO CEM Project

机译：Danieli为POSCO CEM项目开发的下一代薄板坯连铸机

获取原文
获取原文并翻译 | 示例
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

On September 20, 2007 POSCO and Danieli reached the agreement for the joint development program of a new generation of plant for the production of flat products, to be installed in POSCO Gwangyang site, Korea. After many years of trials and developments, POSCO finally decided to completely revamp the existing casting and rolling facilities of his existing minimill in order to both overcome the limitations of the original plant and develop a new revolutionary technology in thin slab casting. Due to technological limitations of original plant, POSCO was not satisfied of the results and decided to completely change the plant layout. In order to reach this ambitious goal, POSCO selected Danieli as technological partner, thanks to his recognized experience in design high speed thin slab casters and hot strip mill facilities, as well as in process automation. The original plant was composed by two single strand thin slab casters connected to two roughing stands for reach line, originally supplied by SMS DEMAG and connected to a finishing mill supplied by MITSUBISHI. In place of the original two thin slab casters, a single "new generation high speed Danieli thin slab caster" will be installed, designed to cast 80 mm thick slabs, up to 8 m/min casting speed. Developed together with POSCO operating and research power, the new high speed thin slab caster, designed to cast at 8 meters per minute, unprecedented in industrial plants, will represent the evolution of already record breaking Danieli fTSC (flexible Thin Slab Caster) enhancing to a new technological level the outstanding quality and productivity performances already proven in Danieli plants. This new plant, called CEM by POSCO, marks the birth of a new generation of mini mills for flat products, being a quantum leap in steel industry technological development towards the vertical integration of separate processes in the steel production.
机译：POSCO和Danieli于2007年9月20日达成了一项共同开发计划的协议，该计划将在韩国POSCO光阳工厂安装新一代生产平板产品的工厂。经过多年的试验和发展，POSCO最终决定彻底改造其现有小型轧机的现有铸造和轧制设备，以克服原始工厂的局限性并开发薄板坯连铸的新革命性技术。由于原始工厂的技术限制，POSCO对结果不满意，因此决定完全改变工厂布局。为了实现这一宏伟目标，POSCO选择了Danieli作为技术合作伙伴，这要归功于他在设计高速薄板坯连铸机，热轧机设备以及过程自动化方面的公认经验。原始设备由两个单股薄板坯连铸机组成，这些连铸机连接到两个前伸线粗加工机架，最初由SMS DEMAG提供，并与三菱提供的精轧机相连。代替原来的两个薄板坯连铸机，将安装单个“新一代高速Danieli薄板坯连铸机”，设计用于铸造80毫米厚的板坯，最高铸造速度为8 m / min。与POSCO运营和研究力量共同开发的新型高速薄板坯连铸机，设计为以每分钟8米的速度铸造，这在工业工厂中是空前的，它将代表已经破纪录的Danieli fTSC（柔性薄板坯连铸机）的发展，并将其提高到新的技术水平，达涅利工厂已经证明了出色的质量和生产率性能。这座新工厂被浦项制铁（POSCO）称为CEM，标志着新一代用于平板产品的小型轧机的诞生，这是钢铁工业技术发展朝着垂直整合单独生产流程的方向飞跃的飞跃。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号