首页> 外文会议>6th international conference on nanochannels, microchannels and minichannels 2008 >CONVECTIVE HEAT TRANSFER PERFORMANCE OF FC-72 IN A PIN-FINNED CHANNEL
【24h】

CONVECTIVE HEAT TRANSFER PERFORMANCE OF FC-72 IN A PIN-FINNED CHANNEL

机译:针形通道中FC-72的对流传热性能

获取原文
获取原文并翻译 | 示例

摘要

This study investigates the influence of the heat flux and mass velocity on convective heat transfer performance of FC-72 in a rectangular channel of 20mm in width and 2 mm in height. The heated side has either a smooth surface or a pin-finned surface. The inlet fluid temperature is maintained at 30℃. The total length of the test channel is 113 mm, with a heated length of 25mm. The flow rate varies between 80 and 960 ml/min, and the heat flux sets between 18 and 50 W/cm~2. The experimental results show that the controlling variable is heat flux instead of flow rate because of the boiling activities in FC-72. At a fixed flow rate, the pin-finned surface yields up to 20% higher heat transfer coefficient and greater critical heat flux than those of a smooth surface.
机译:这项研究调查了热通量和质量速度对FC-72在宽度为20mm,高度为2mm的矩形通道中对流传热性能的影响。受热面的表面光滑或针刺状。入口流体温度保持在30℃。测试通道的总长度为113毫米,加热长度为25毫米。流速在80至960 ml / min之间变化,热通量在18至50 W / cm〜2之间。实验结果表明,由于FC-72的沸腾活性,控制变量是热通量而不是流量。在固定流速下,针状翅片表面的传热系数和临界热通量比光滑表面高20%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号