Dependence of Laser Lines of a Line Selecting CO_2 Laser on Laser Mixture Components/Pressure

机译：选择CO_2激光的线的激光线对激光混合物成分/压力的依赖性

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

CO_2 lasers emit laser lines at about 90 discrete wavelengths around 10 mu m. A blazed grating is usually employed as the output mirror in the resonator. By adjusting the angle between the grating and the optical axis, a desired laser line can be selected since all other potential laser lines will suffer from high losses. For the purpose of increasing the laser lines so as to broaden its pumping ability for far infrared lasers, the dependence of lasing lines on the components as well as the total pressure has been investigated. The laser envelope used was 1200mm long with a capillary diameter 12mm. Lasing lines was in situ measured by using Wang's method. Experimental results will be reported in the manuscript.

机译：CO_2激光以10微米左右的90个离散波长发射激光线。通常在谐振器中使用闪耀光栅作为输出镜。通过调整光栅和光轴之间的角度，可以选择所需的激光线，因为所有其他潜在的激光线都将遭受高损耗。为了增加激光线以扩大其对远红外激光的泵浦能力，已经研究了激光线对部件以及总压力的依赖性。所使用的激光外壳为1200mm长，毛细管直径为12mm。用王氏法原位测量拉线。实验结果将在手稿中报告。

著录项

来源
《Conference on Laser Frequency Stabilization, Standards, Measurement, and Applications Jan 24-26, 2001, San Jose, USA》|2001年|p.262-267|共6页
会议地点 San Jose CA(US)
作者
Yuzhi Wang;
展开▼
作者单位

Southwest Jiaotong University, 610031, Chengdu, P.R.China;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类无线电电子学、电信技术;
关键词
dependence; laser lines; line-selecting; CO_2 laser; laser mixture; wang's method;

机译：依赖激光线选线CO_2激光；激光混合物王的方法;

相似文献

外文文献
中文文献
专利

1. Finite Element Analysis to determine the optimum contact pressure between the components of a hip implant made by using the Selective Laser Sintering and the Selective Laser Melting Technologies [J] . R?zvan P?curar, Ancu?a P?curar, Anna Petrilak MATEC Web of Conferences . 2017,第1期

机译：有限元分析，以确定通过使用选择性激光烧结和选择性激光熔化技术制备的髋部植入物的组分之间的最佳接触压力
2. RF Discharge in CO_2 Laser Mixtures at Moderate Pressures [J] . S. A. Starostin, K. J. Boller, P. J. M. Peters, Plasma physics reports . 2002,第1期

机译：中压下CO_2激光混合物中的RF放电
3. DEPENDENCES OF SMALL-SIGNAL GAIN AND SATURATION-ENERGY INTENSITY ON LASER ACTIVE LENGTH, BUFFER-GAS TYPE, AND PRESSURE VARIATIONS IN GOLD-VAPOR LASERS [J] . Davood Salehinia, Kamran Khorasani Journal of Russian laser research . 2008,第4期

机译：小信号增益和饱和能量强度与金蒸气激光器的激光活动长度，缓冲气体类型和压力变化的关系
4. Dependence of Laser Lines of a Line Selecting CO_2 Laser on Laser Mixture Components/Pressure [C] . Yuzhi Wang Conference on laser frequency stabilization, standards, measurement, and applications . 2001

机译：激光线的依赖性选择CO_2激光在激光混合物组件/压力下
5. Hot isostatic pressing of direct selective laser sintered metal components. [D] . Wohlert, Martin Steven. 2000

机译：直接选择激光烧结金属部件的热等静压。
6. Pressure-Assisted Capillary Electrophoresis Coupling with Matrix-Assisted Laser Desorption/Ionization-Mass Spectrometric Imaging for Quantitative Analysis of Complex Peptide Mixtures [O] . Zichuan Zhang, Hui Ye, Junhua Wang, -1

机译：压力辅助毛细管电泳耦合与基质辅助激光解吸/电离质谱成像用于复合肽混合物的定量分析
7. Temperature dependence of spontaneous switch-on and switch-off of laser cavity solitons in vertical-cavity surface-emitting lasers with frequency-selective feedback [O] . Jimenez J, Oppo G-L, Ackemann T 2016

机译：具有频率选择反馈的垂直腔面发射激光器中激光腔孤子的自发开启和关闭与温度的关系

Dependence of Laser Lines of a Line Selecting CO_2 Laser on Laser Mixture Components/Pressure

摘要

著录项

相似文献

相关主题

期刊订阅