• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>Eighth European Congress on Fluid Machinery for Oil, Gas, and Petrochemical Industry Oct 31-Nov 1, 2002 The Hague, The Netherlands >Ultra-high pressure water injection pumping design
【24h】

Ultra-high pressure water injection pumping design

机译：超高压注水抽水设计

获取原文
获取原文并翻译 | 示例
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

With an ever increasing drive to find oil the requirements for high pressure reservoir maintenance has been steadily rising with up to 600 bar required for continuous well fracturing and injection. A single pump solution for this application has been developed with the key objectives of achieving: - 1. A high level of safety requiring centrifugal pump technology to be developed to a standard exceeding that currently available in the market place. 2. A high through life efficiency. 3. An expected service life of 25 years. 4. A pump design suitable for continuous operation at pressures up to 600 bar, compatible with both seawater and produced water injection. With its long history of designing engineering solutions to fluid pumping problems, a Weir pump design was developed from solid proven fundamentals for the required application rather than adopting a stretch approach to an existing design. Basic hydraulic and mechanical design fundamentals were therefore established for the envisaged operating range and duty requirements. This paper discusses the pump selected together with the process and methodology followed to arrive at the final solution.
机译：随着寻找油的需求不断增加，对高压油层维护的要求一直在稳定增长，连续压裂和注入所需的压力高达600 bar。已经开发出用于该应用的单泵解决方案，其主要目标是实现：-1.高水平的安全性要求将离心泵技术的开发水平提高到目前市场上无法获得的水平。 2.高寿命效率。 3.预期使用寿命为25年。 4.泵设计适合在高达600 bar的压力下连续运行，与海水和采出水兼容。凭借设计长期解决流体泵送问题的工程解决方案的悠久历史，Weir泵的设计是基于经过验证的坚实基础来满足所需应用的，而不是对现有设计采用拉伸方法。因此，为预期的工作范围和负荷要求建立了基本的液压和机械设计基础。本文讨论了选择的泵，以及为最终解决方案所遵循的过程和方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号