• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>High and low concentrator systems for solar electric applications VIII >Concept and initial design of a stationary concentrator photovoltaic system based on a mirror array
【24h】

Concept and initial design of a stationary concentrator photovoltaic system based on a mirror array

机译：基于反射镜阵列的固定式聚光光伏系统的概念和初步设计

获取原文
获取原文并翻译 | 示例
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

We propose a stationary module in which a mirror array is inserted between a lens and a solar cell. Each mirror is set up so that the light passing the principal point of the lens reaches a fixed point on an exit plane and that the length of its optical path is equal to the focal length of the lens. The light passing the other points in the lens reaches other mirrors. If the reflected light mostly reached the area near the fixed point, a slightly larger solar cell would harvest it. We have carried out ray tracing simulations to see how the optical power is distributed on an exit plane of such a module. The model consists of a hollow rectangular parallelepiped containing a mirror array, a plano-convex lens attached to the top plane of the parallelepiped, and a detector attached to one of the side planes. A light source generates parallel beams with various directions defined by the declination angle and the hour angle. Although the irradiance distribution at the exit plane depends on these angles, the basic concept of confining the optical power inside a certain area is demonstrated. Further studies on its design would improve its light utilization. For example, the rays with large incident angles suffer from total internal reflection at the bottom of the lens. Filling the hollow parallelepiped by a material with a matching refraction index solves this problem.
机译：我们提出了一种固定模块，其中在透镜和太阳能电池之间插入了反射镜阵​​列。设置每个反射镜，以使通过透镜主点的光到达出射平面上的固定点，并且其光路长度等于透镜的焦距。通过透镜中其他点的光会到达其他反射镜。如果反射光大部分到达固定点附近的区域，则稍大的太阳能电池将捕获该光。我们已经进行了射线追踪模拟，以查看光功率如何在此类模块的出口平面上分布。该模型由一个中空的平行六面体组成，该平行六面体包含一个反射镜阵列，一个附着在平行六面体顶面上的平凸透镜和一个附着在其中一个侧面上的检测器。光源产生具有由偏转角和时角定义的各个方向的平行光束。尽管出射面处的辐照度分布取决于这些角度，但仍展示了将光功率限制在特定区域内的基本概念。对其设计进行进一步研究将提高其光利用率。例如，具有大入射角的光线在透镜底部会遭受全内反射。用折射率匹配的材料填充中空平行六面体可解决此问题。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号