首页> 外文会议>International Conference on Microalloying for New Steel Processes and Applications; 20050907-09; Basque Country(ES) >Austenite Grain Size of Thin Slab and its Influence on Direct Hot Strip Rolling of Nb Microalloyed Steel
【24h】

Austenite Grain Size of Thin Slab and its Influence on Direct Hot Strip Rolling of Nb Microalloyed Steel

机译:薄板坯奥氏体晶粒度及其对Nb微合金钢热轧直接轧制的影响

获取原文
获取原文并翻译 | 示例

摘要

In the production with thin slab casting a serious problem of insufficient grain refinement and microstructural inhomogeneity has been found. In this paper attention has been paid to the austenite grain size changes in thin slab of a high strength Nb microalloyed steel under as-cast conditions and after first rolling pass. For comparison, the conventional thick slab was also investigated. It was found that although as-cast thin slab shows a smaller average austenite grain size than that of as cast thick slab; the latter after reheating shows a much finer average austenite grain size. The first rolling pass at high temperature and with heavy reduction causes rapid recrystallization that contributes to austenite grain refinement.
机译:在薄板坯铸件的生产中,已经发现严重的问题,即晶粒细化不充分和微观结构不均匀。在本文中,已经关注了高强度Nb微合金钢在铸态和第一次轧制后的薄板中奥氏体晶粒度的变化。为了比较,还研究了常规的厚板。结果发现,虽然铸薄板坯的平均奥氏体晶粒尺寸比铸厚板坯的小。后者在重新加热后显示出更精细的平均奥氏体晶粒尺寸。高温下大量轧制的第一道次轧制会导致快速重结晶,这有助于奥氏体晶粒细化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号