【24h】

DEVELOPMENT OF ULTRASONIC PHASED ARRAY PROBE FOR SAW SEAM INSPECTION OF UOE PIPE

机译:UOE管锯缝检测的超声相控阵探头的研制

获取原文
获取原文并翻译 | 示例

摘要

The requirements of Ultrasonic Testing, such as DNV, ISO specification etc., for longitudinal submerged arc weld (SAW) seam of UOE pipe become severe to the offshore steel line-pipe with high grade and heavy wall thickness. In order to satisfy the requirements, testing method with multi-probe arrangement have been widely applied in the pipe manufacture. Recently, the phased array technique has been applied for inspection of girth welds of pipeline and longitudinal ERW (electric resistance welded) seam instead of multi-probe method. But the inspection system with conventional phased array probe has many difficulty to apply for inspection longitudinal SAW seam of UOE pipe, because of defect detection capabilities, array elements arrangement, and so on. The authors have developed an applicable ultrasonic phased array probe to satisfy the severe requirements for longitudinal SAW seam of UOE pipe. This paper presents the results of our original designed array probe, which has been composed of 32-transducer elements mounted on cylindrical-shaped plastics, and also compares the inspection results to those obtained on the conventional multi-probe and our developed array probe in the UOE pipe mill.
机译:UOE管的纵向埋弧焊(SAW)接缝的超声波测试(例如DNV,ISO规范)的要求对于具有高品位和厚壁厚度的海上钢线管变得更加严格。为了满足要求,多探针布置的测试方法已广泛应用于管道制造中。近来,相控阵技术已经代替多探针法用于管道和纵向ERW(电阻焊)接缝的环缝焊缝的检查。但是,由于缺陷检测能力,阵列元件布置等原因,采用常规相控阵探头的检测系统很难对UOE管的纵向SAW接缝进行检测。作者已经开发出一种适用的超声相控阵探头,以满足对UOE管纵向SAW接缝的严格要求。本文介绍了我们最初设计的阵列探针的结果,该探针由安装在圆柱形塑料上的32个换能器元件组成,并且还将检测结果与常规多探针和我们开发的阵列探针在实验室中获得的结果进行了比较。 UOE钢管厂。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号