首页> 外文会议>International Conference on Optics and Photonics 2015 >Design and Proposal of Dual Line-of-Defense Perimeter Watchdog incorporating optimally designed FBG based Accelerometers and Strain Sensors using Single Optical Fiber
【24h】

Design and Proposal of Dual Line-of-Defense Perimeter Watchdog incorporating optimally designed FBG based Accelerometers and Strain Sensors using Single Optical Fiber

机译:结合采用单光纤的优化设计的基于FBG的加速度计和应变传感器的双防线外围看门狗的设计和建议

获取原文
获取原文并翻译 | 示例

摘要

Paper presents Opto-Mechanical intrusion sensor fence with FBGs attached to mechanical accelerometers and strain sensors, optimized on SolidWorks 2013 for desired frequency to 35 Hz, picking up accelerations/ strains and its deployment for perimeter security. The accelerometer structure consists of inertial mass supported by an L-shaped modified cantilever beam having non-uniform cross section area connected to base by a thin neck element which acts as strain concentrated centre hence an optimum zone for FBG sensors placement. Bragg wavelength shifts were obtained on Optigrating software for the obtained strain values on mechanical assembly offence. CFD wind analysis is performed on the assembly to obtain the spot for accelerometer's placement to avoid false alarms up to wind velocities of 20 m/s.
机译:论文介绍了光机械入侵传感器围栏,其带有与机械加速度计和应变传感器相连的FBG,在SolidWorks 2013上进行了优化,可将期望频率提高到35 Hz,从而获得加速度/应变,并部署以提高周边安全性。加速度计结构由惯性质量组成,该惯性质量由L型修改的悬臂梁支撑,该悬臂梁的横截面面积不均匀,通过细颈元件连接到基座,细颈元件用作应变集中中心,因此是FBG传感器放置的最佳区域。在Optigrating软件上获得了布拉格波长偏移,以获取机械装配违规时获得的应变值。在组件上执行CFD风分析,以获得加速度计放置的位置,以避免在风速达到20 m / s时产生误报。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号