A Study on Ultrafine Ferrite Formation During Post Deformation Cooling

机译：后变形冷却过程中超细铁素体形成的研究

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

The grain growth of dynamic strain induced transformation (DSIT) ferrite during post deformation cooling for two prior austenite grain sizes was investigated by hot torsion test. The results showed that the prior austenite grain size affected the distribution of DSIT ferrite nucleation sites and the subsequent coarsening behaviour of the grain boundary (GB) and the intragranular grains (IG) nucleated during post deformation cooling. Moreover, an increase in post deformation cooling rate led to decrease in the coarsening rate and the final ferrite grain size.

机译：通过热扭转试验研究了两种先前奥氏体晶粒尺寸的变形后冷却过程中动态应变诱导转变（DSIT）铁素体的晶粒长大。结果表明，先前的奥氏体晶粒尺寸影响着DSIT铁素体成核位置的分布，以及随后的变形冷却过程中晶界（GB）和晶粒内晶粒（IG）的随后粗化行为。而且，变形后冷却速度的增加导致粗化速度和最终铁素体晶粒尺寸的减小。

著录项

来源
《International Conference on Processing amp; Manufacturing of Advanced Materials Pt.2; Jul 7-11, 2003; Leganes, Madrid, Spain》|2003年|p.1295-1300|共6页
会议地点 Madrid(ES);Madrid(ES)
作者
A. Shokouhi; H. Beladi; P.D. Hodgson;
展开▼
作者单位

School of Engineering and Technology-Deakin University-Geelong VIC 3217 Australia;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类一般工业技术;
关键词
ultrafine ferrite; dynamic strain-induced transformation; grain coarsening; cooling rate;

机译：超细铁素体动态应变诱发相变晶粒粗化冷却速率;

相似文献

外文文献
中文文献
专利

1. Creation of ultrafine ferrite grain steels by heavy deformation after rapid cooling and deformation temperature-dependence of deformation structuresin austenite [J] . 足立吉隆, 富田俊郎材料とプロセス: 日本鉄鋼協会講演論文集 . 1999,第6期

机译：快速冷却后大变形产生奥氏体变形组织的变形温度与温度的关系
2. Creation of ultrafine ferrite grain steels by heavy deformation after rapid cooling and deformation temperature-dependence of deformation structuresin austenite [J] . 足立吉隆, 富田俊郎材料とプロセス: 日本鉄鋼協会講演論文集 . 1999,第6期

机译：快速冷却后变形的超细变形创建超细铁氧体颗粒钢的变形结构抑制素奥氏体依赖性
3. Formation of ultrafine grained ferrite in low carbon steel by heavy deformation in ferrite or dual phase region [J] . Y. D. Huang, W. Y. Yang, Z. Q. Sun Journal of Materials Processing Technology . 2003,第1期

机译：低碳钢中铁素体或双相区的大变形形成超细晶粒铁素体
4. A Study on Ultrafine Ferrite Formation During Post Deformation Cooling [C] . A. Shokouhi, H. Beladi, P.D. Hodgson International Conference on Processing Manufacturing of Advanced Materials . 2003

机译：后变形冷却过程中超细铁氧体形成研究
5. A Comparison Study of the Transformation Behavior during Uniform Continuous Cooling and Hot Deformation Characteristics of a Wrought and Selective Laser Melting 4340 Steels [D] . Wang, Yuankang. 2021

机译：一种锻造和选择性激光熔化4340钢均匀连续冷却和热变形特性变换行为的比较研究
6. Hot-Deformation Behavior of High-Nitrogen Austenitic Stainless Steel under Continuous Cooling: Physical Simulation of Surface Microstructure Evolution of Superheavy Forgings during Hot Forging [O] . Zhenhua Wang, Yong Wang 2019

机译：高氮奥氏体不锈钢在连续冷却下的热变形行为：热锻过程中超重锻件表面组织演变的物理模拟
7. THE EFFECT OF PLASTIC DEFORMATION ON THE FORMATION OF DIFFERENT MORPHOLOGIES OF FERRITE UPON COOLING [O] . Y. Van Leeuwen, J. Sietsma 2016

机译：塑性变形对冷却时铁素体形态的影响
8. Microstructure Evolution and Mechanical Behavior of Ultrafine Ti-6Al-4V During Low Temperature Superplastic Deformation (Postprint). [R] . Zherebtsov, S. V., Kudryavtsev, E. A., Salishchev, G. A., 2016

机译：超低Ti-6al-4V低温超塑性变形（后印刷）的组织演变与力学行为。

A Study on Ultrafine Ferrite Formation During Post Deformation Cooling

摘要

著录项

相似文献

相关主题

期刊订阅