首页> 外文会议>International Symposium on Eco-Materials Processing amp; Design; 20060108-11; Chengdu(CN) >Surface Modification of Glass Plate to Enhance Thickness of Silica Aerogel
【24h】

Surface Modification of Glass Plate to Enhance Thickness of Silica Aerogel

机译:玻璃板的表面改性以增加二氧化硅气凝胶的厚度

获取原文
获取原文并翻译 | 示例

摘要

Surface modification process was employed to enhance the thickness of film and avoid crack propagation during ambient drying for the smart glazing. To eliminate the hydrocarbon on the surface of glass, UV was irradiated on the glass slide under oxygen atmosphere. The wetting angle was reduced to the optimal condition for dip-coating when UV irradiation with oxygen time was kept for 10minutes. The thickness of the surface modification samples have almost double value compared to the sample of non-surface treatment. The thickness of the film after heat treatment of the substrate was highly increased.
机译:采用表面改性工艺来增加薄膜厚度并避免在智能玻璃的环境干燥过程中裂纹扩展。为了消除玻璃表面上的碳氢化合物,在氧气气氛下在载玻片上照射紫外线。当用氧气时间紫外线照射保持10分钟时,润湿角减小到浸涂的最佳条件。与非表面处理的样品相比,表面改性样品的厚度几乎具有两倍的值。基材热处理后的膜厚度大大增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号