【24h】

Fe-based bulk metallic glasses with Y addition

机译:含Y的铁基块状金属玻璃

获取原文
获取原文并翻译 | 示例

摘要

This paper aims to study the role of residual vacuum during sample preparation and of quenching rate on glass formation in Fe_(50-x)Cr_(15)Mo_(14)Y_xC_(15)B_6 (x = 0, 2) alloys. The equilibrium phase mixture has been clarified for both alloys, combining X-ray diffraction (XRD) and scanning electron microscopy (SEM) measurements. The beneficial effects of minor addition of Y on the glass formation are evidenced. A high residual vacuum during sample preparation promotes glass formation. Glass transition temperature for amorphous sample containing 2 at.% Y is 881 K and the onset crystallization temperature is 904 K. The melting behavior for both as-cast alloys were measured with high temperature differential scanning calorimeter (HTDSC). Melting starts at 1384 K, ends at 1506 and 1470 K as liquidus temperatures for Fe_(50)Cr_(15)Mo_(14)C_(15)B_6 and Fe_(48)Cr_(15)Mo_(14)Y_2C_(15)B_6 alloys, respectively. The addition of Y leads to a melting behavior of as-cast sample close to eutectic, which enhances glass formation.
机译:本文旨在研究样品制备过程中残余真空和淬火速率对Fe_(50-x)Cr_(15)Mo_(14)Y_xC_(15)B_6(x = 0,2)合金中玻璃形成的作用。结合X射线衍射(XRD)和扫描电子显微镜(SEM)测量,两种合金的平衡相混合物均已澄清。证明了少量添加Y对玻璃形成的有益作用。样品制备过程中的高残留真空会促进玻璃的形成。 Y含量为2 at。%的无定形样品的玻璃化转变温度为881 K,起始结晶温度为904K。两种铸态合金的熔融行为均通过高温差示扫描量热仪(HTDSC)进行测量。 Fe_(50)Cr_(15)Mo_(14)C_(15)B_6和Fe_(48)Cr_(15)Mo_(14)Y_2C_(15)的液相线温度始于1384 K,终止于1506和1470 K B_6合金。 Y的添加导致铸态样品接近共晶的熔融行为,这增强了玻璃的形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号