Favorable Alloy Compositions and Melt Temperatures to Cast 2XXX and 7XXX Al alloys by Controlled Diffusion Solidification (CDS)

机译：通过控制扩散凝固（CDS）铸造2XXX和7XXX铝合金的有利合金组成和熔体温度

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

Controlled diffusion solidification (CDS) is an innovative rheocasting (Semi-solid) processing route to obtain a cast part with a non-dendritic morphology of the primary Al phase. The process involves mixing two alloy melts with specific individual compositions and temperatures to produce the desired final alloy by mixing and immediately casting in a mold. The process enables the shape casting of Al based wrought alloy along with their superior cast properties and performance. The present work defines process conditions to enable shaped casting of the 2XXX and 7XXX series of Al based wrought alloys, specifically, 2024, 7005 and 7075 alloys.

机译：受控扩散凝固（CDS）是一种创新的流变铸造（半固态）工艺路线，用于获得具有原始Al相的非枝晶形态的铸件。该方法涉及将两种具有特定组成和温度的合金熔体混合，以通过混合并立即在模具中铸造来生产所需的最终合金。该工艺可实现基于Al的锻造合金的异型铸造以及其出色的铸造性能和性能。本工作定义了工艺条件，以能够对2XXX和7XXX系列的铝基锻造合金，特别是2024、7005和7075合金进行异型铸造。

著录项

来源
《International symposium on shape casting;TMS annual meeting amp; exhibition; 20090215-19;20090215-19; San Francisco, CA(US);San Francisco, CA(US)》|2009年|P.223-230|共8页
会议地点 San Francisco CA(US);San Francisco CA(US)
作者
Peyman Ashtari; Gabriel Birsan; Sumanth Shankar;
展开▼
作者单位

Light Metal Casting Research Centre (LMCRC), Department of Mechanical Engineering, McMaster University, Hamilton, ON, Canada;

Light Metal Casting Research Centre (LMCRC), Department of Mechanical Engineering, McMaster University, Hamilton, ON, Canada;

Ligh;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类有色金属铸造;
关键词
CDS; controlled diffusion solidification; 2024; 7005; 7075; rheocasting;

机译：CDS;受控扩散固化; 2024; 7005; 7075;流变铸造;

相似文献

外文文献
中文文献
专利

1. 采用铸造-倾析-铸造技术制备A390/A356铝合金功能梯度复合材料时过热和凝固层厚度对其界面接合的影响 [J] . M.MOHAMMADI RAHVARD, M.TAMIZIFAR, M.A.BOUTORABI, 中国有色金属学报（英文版） . 2014,第003期
2. 采用铸造-倾析-铸造技术制备A390／A356铝合金功能梯度复合材料时过热和凝固层厚度对其界面接合的影响 [J] . M. MOHAMMADI RAHVARD, M. TAMIZIFAR, M. A. BOUTORABI, 中国有色金属学报：英文版 . 2014,第003期
3. Controlled Diffusion Solidification Pathway of an AA 7xxx Series Aluminum Alloy [J] . Pourgharibshahi Mohammad, Saghafian Hassan, Divandari Mehdi, Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2019,第1期

机译：AA 7XXX系列铝合金的控制扩散凝固途径
4. Effect of mixing rate and temperature on primary Si phase of hypereutectic Al-20Si alloy during controlled diffusion solidification (CDS) process [J] . Yuan-dong Li, Xin-long Zhang, Ying Ma, China Foundry . 2015,第3期

机译：混合速率和温度对过共晶Al-20Si合金受控扩散凝固（CDS）过程中初生Si相的影响
5. Microstructure, Intermetallic Phases, and Fractography of the Cast Al-5.8Zn-2.2Mg-2.5Cu Alloy by Controlled Diffusion Solidification [J] . Ghiaasiaan Reza, Shankar Sumanth Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2020,第9期

机译：通过控制扩散凝固铸造Al-5.8Zn-2.2mg-2.5Cu合金的微观结构，金属间相和术术
6. Favorable Alloy Compositions and Melt Temperatures to Cast 2XXX and 7XXX Al alloys by Controlled Diffusion Solidification (CDS) [C] . Peyman Ashtari, Gabriel Birsan, Sumanth Shankar International Symposium on Shape Casting . 2009

机译：有利的合金组合物和熔融温度通过受控扩散凝固铸造2xxx和7xxx al合金（CDS）
7. Predictions of precipitation reaction mechanisms for 7xxx series aluminum alloys cast by CDS technique. [D] . Sobrino, Luca. 2014

机译：用CDS技术预测7xxx系列铝合金的沉淀反应机理。
8. Modeling diffusion-governed solidification of ternary alloys – Part 1: Coupling solidification kinetics with thermodynamics [O] . M. Wu, J. Li, A. Ludwig, -1

机译：三元合金扩散控制的凝固建模–第1部分：将凝固动力学与热力学耦合
9. Predictions of precipitation reaction mechanisms for 7xxx series aluminum alloys cast by CDS technique [O] . Sobrino Luca 2014

机译：CDS铸造7xxx系列铝合金的沉淀反应机理预测
10. Fatigue Crack-Growth Resistance of Aluminum Alloys Under Spectrum Loading. Volume 1. Commercial 2XXX and 7XXX Alloys [R] . Scarich, G. V., Bretz, P. E. 1985

机译：光谱加载下铝合金的疲劳裂纹扩展性能。第1卷。商用2XXX和7XXX合金

Favorable Alloy Compositions and Melt Temperatures to Cast 2XXX and 7XXX Al alloys by Controlled Diffusion Solidification (CDS)

摘要

著录项

相似文献

相关主题

期刊订阅