Composite material of cermets made by SHS

机译：SHS制造的金属陶瓷复合材料

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

Based on self-propagating high temperature synthesis (SHS) technology, the ceramic coating with thickness of 2.5 mm on the surface of carbon steel and square steel tube was produced under gravity condition. The phase compositions of the coating were determined by X-ray diffractometry. The microstructure of the coating, interfacial structure and hardness between coating and steel body were analyzed by optics microscopy and scanning electron microscopy. The wear resistance of the ceramic coating was investigated. The results show that the combine between ceramic coating and metal base body is firm. There are few air vents and good densification in the coating. Ceramic coating is mainly made up α-Al_2O_3 base body phase and FeO-Al_2O_3 spinelle phase. SiO_2 exists together with the crystallization quartz phase in the ceramic coating. The hardness(HV_(0.2)) of composite can reach 1 500. The wearability of ceramic coating is eight times higher than that of hardened steel No. 45 of HRC 50.

机译：基于自蔓延高温合成（SHS）技术，在重力条件下制备了碳钢和方钢管表面厚度为2.5mm的陶瓷涂层。涂层的相组成通过X射线衍射法测定。通过光学显微镜和扫描电子显微镜分析了涂层的显微组织，界面结构和钢与钢之间的硬度。研究了陶瓷涂层的耐磨性。结果表明，陶瓷涂层与金属基体的结合牢固。涂层中的通风孔少且致密性好。陶瓷涂层主要由α-Al_2O_3基体相和FeO-Al_2O_3尖晶石相组成。 SiO_2与结晶石英相一起存在于陶瓷涂层中。复合材料的硬度（HV_（0.2））可以达到1500。陶瓷涂层的耐磨性是HRC 50的45号硬化钢的八倍。

著录项

来源
《International Workshop on Advanced Metallic Materials and Processing Techniques for Aeronautical Applications; 20051118-20; Nanjing(CN)》|2005年|P.388-392|共5页
会议地点 Nanjing(CN)
作者
Wang Feng-hui; Jiao An-yuan; Yang Shi-qiong; Gao Xing-qi;
展开▼
作者单位

Mechanical Engineering Institute, Anshan University of Science and Technology, Anshan 114044, China;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类金属材料;
关键词
ceramic coating; gravitational separation; SHS method; hardness;

机译：陶瓷涂层;重力分离; SHS法;硬度;

相似文献

外文文献
中文文献
专利

1. Frictional behavior and wear resistance performance of gradient cermet composite tool materials sliding against hard materials [J] . Ji Wenbin, Zou Bin, Liu Yanan, CERAMICS INTERNATIONAL . 2017,第10期

机译：梯度金属陶瓷复合工具材料滑动对硬材料的摩擦行为及耐磨性
2. Terpolymer (ABS) cermet (Ni-NiFe_2O_4) hybrid nanocomposite engineered 3D-carbon fabric mat as a X-band electromagnetic interference shielding material [J] . Magisetty RaviPrakash, Shukla Anuj, Kandasubramanian Balasubramanian Materials Letters . 2019,第MARa1期

机译：三元共聚物（ABS）金属陶瓷（Ni-NiFe_2O_4）杂化纳米复合工程3D碳纤维织物毡作为X波段电磁干扰屏蔽材料
3. Synthesis of tungstates/Ni_(0.5)Cu_(0.5)O nanocomposite materials for hydrogen separation cermet membranes [J] . Y. Bespalko, V. Sadykov, N. Eremeev, Composite Structures . 2018,第OCTa期

机译：用于氢分离金属陶瓷膜的钨酸盐/Ni_(0.5)Cu_(0.5)O纳米复合材料的合成
4. Composite material of cermets made by SHS [C] . Wang Feng-hui, Jiao An-yuan, Yang Shi-qiong, International Workshop on Advanced Metallic Materials and Processing Techniques for Aeronautical Applications . 2005

机译：CERMETS由SHS制作的复合材料
5. Development of a new type of composite material: A glass based laminated cermet. [D] . Brown, Dennis P. 2006

机译：新型复合材料的开发：玻璃基层压金属陶瓷。
6. Reduction Dynamics of Doped Ceria Nickel Oxide and Cermet Composites Probed Using In Situ Raman Spectroscopy [O] . Robert C. Maher, Paul R. Shearing, Edward Brightman, 2016

机译：原位拉曼光谱探测掺杂的二氧化铈氧化镍和金属陶瓷复合材料的还原动力学
7. Des constructions innovantes en matériaux composites : Premiers prototypes de Grid Shells = Grid Shells in composite materials [O] . Caron Jean-François, Bouhaya Lina, Baverel Olivier, 2009

机译：复合材料的创新构造：网格壳的第一个原型=复合材料中的网格壳

Composite material of cermets made by SHS

摘要

著录项

相似文献

相关主题

期刊订阅