首页> 外文会议>International conference on advanced materials research >Transition in The Fretting Phenomenon Based On The Variabile Coefficient Of Friction
【24h】

Transition in The Fretting Phenomenon Based On The Variabile Coefficient Of Friction

机译:基于摩擦系数的微动现象的转变

获取原文

摘要

Fretting is now fully identified as a small amplitude oscillatory motion which induces a harmonic tangential force between two surfaces in contact.It is related to three main loadings,i.e.frettingwear,fretting-fatigue and fretting corrosion. Fretting regimes were first mapped by Vingsbo.In a similar way,three fretting regimes will be considered: stick regime,slip regime and mixed regime.The mixed regime was made up of initial gross slip followed by partial slip condition after a few hundred cycles.Obviously the partial slip transition develops the highest stress levels which can induce fatigue crack nucleation depending on the fatigue properties of the two contacting first bodies. Therefore prediction of the frontier between partial slip and gross slip is required.
机译:现在,微动完全被认为是一种小振幅的振荡运动,它会在接触的两个表面之间引起谐波切向力,这与三个主要载荷有关,即微动磨损,微动疲劳和微动腐蚀。微动状态首先由Vingsbo绘制地图。以类似的方式,将考虑三种微动状态:摇动状态,滑动状态和混合状态。混合状态由初始总滑动和随后的几百个循环组成。显然,部分滑动过渡产生了最高的应力水平,该应力水平取决于两个接触的第一实体的疲劳特性,可以引起疲劳裂纹成核。因此,需要预测部分滑移和总滑移之间的边界。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号