• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>International Conference on Computer, Communications, and Control Technology >Miniaturization of printed monopole antenna through fractal geometry and partial cutting methods for UHF application
【24h】

Miniaturization of printed monopole antenna through fractal geometry and partial cutting methods for UHF application

机译：通过分形几何和UHF应用中的局部切割方法使印刷单极天线小型化

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

This paper reports an investigation on a combination of fractal geometry and half cutting methods in designing a printed monopole antenna for low frequency application. The effects of the combination of fractal shape and partial cutting methods to the printed monopole antenna performances were studied. All designs operate at the Ultra High Frequency (UHF) band. The fractal geometry was proposed in order to shift down the resonant frequency while partial cutting method helps to a further reduction of the overall size of the antenna. Based on the results, it was found that the overall size of the proposed antenna is 53.68 % smaller than the conventional printed monopole antenna at the same resonant frequency. The monopole antenna size is 70.89 × 135.82 × 1.67 mm. It has gain of 2.72 dBi with omnidirectional radiation pattern.
机译：本文报道了在设计用于低频应用的印刷单极天线时结合分形几何学和半切割方法的研究。研究了分形和部分切割方法相结合对印刷单极天线性能的影响。所有设计都在超高频（UHF）频段上运行。为了降低谐振频率，提出了分形几何形状，而部分切割方法有助于进一步减小天线的整体尺寸。根据结果​​，发现在相同的谐振频率下，拟议天线的总尺寸比常规印刷单极天线小53.68％。单极天线尺寸为70.89×135.82×1.67 mm。具有全向辐射方向图的增益为2.72 dBi。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号