首页> 外文会议>World foundry congress >NUMERICAL AND EXPERIMENTAL STUDIES ON THE COOLING CONDITIONS OF CAST ALUMINIUM SEMI-FINISHED PRODUCT FOR FORGING PROCESS

【24h】

NUMERICAL AND EXPERIMENTAL STUDIES ON THE COOLING CONDITIONS OF CAST ALUMINIUM SEMI-FINISHED PRODUCT FOR FORGING PROCESS

机译：铸铝半成品锻造过程冷却条件的数值和实验研究

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

In order to use semi-finished cast products in the forging process, it is necessary to provide an appropriate casting microstructure. If the chemical composition of the alloy cannot be changed (e.g. through the grain refinement), the main factor determining the obtaining of a finer grain size is the cooling rate and indirectly solidification time. The presented results showed that it is possible to determine the optimal cooling condition in order to obtain proper casting microstructure.

机译：为了在锻造过程中使用铸件半成品，必须提供适当的铸件显微组织。如果合金的化学组成不能改变（例如通过晶粒细化），则决定获得较细晶粒尺寸的主要因素是冷却速率和间接凝固时间。给出的结果表明，有可能确定最佳的冷却条件以获得适当的铸造组织。

著录项

来源
《World foundry congress》|2018年|405-406|共2页
会议地点
作者
Michal Szucki; Janusz Buras; Anna Dziubihska; Pawel Leszek Zak;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类
关键词
aluminium alloys; numerical simulations; heat transfer; casting; forging;

机译：铝合金数值模拟;传播热量;铸件;锻造;

相似文献

外文文献
中文文献
专利

1. Microstructure evolution of rheo-cast A356 aluminium alloy in consideration of different cooling conditions by means of the cooling channel process [J] . Matthias Bunck, Nils Warnken, Andreas Buhrig-Polaczek Journal of Materials Processing Technology . 2010,第4期

机译：考虑不同冷却条件的流变铸造A356铝合金的组织演变
2. Experimental and Numerical Investigation of the Effect of Process Conditions on Residual Wall Thickness and Cooling and Surface Characteristics of Water-Assisted Injection Molded Hollow Products [J] . HyungpilPark, Baeg-SoonCha, ByungohkRhee Advances in materials science and engineering . 2015,第3期

机译：工艺条件对水助注塑空心制品残余壁厚，冷却和表面特性影响的实验和数值研究
3. Finite element modelling and experimental analysis of the processing conditions for obtaining straight blades by isothermal forging of a nanostructured aluminium-magnesium alloy [J] . Daniel Salcedo, Carmelo J. Luis, Rodrigo Luri, International journal of materials & product technology . 2013,第1a4期

机译：纳米铝镁合金等温锻造获得直叶片的加工条件的有限元建模与实验分析
4. NUMERICAL AND EXPERIMENTAL STUDIES ON THE COOLING CONDITIONS OF CAST ALUMINIUM SEMI-FINISHED PRODUCT FOR FORGING PROCESS [C] . Michal Szucki, Janusz Buras, Anna Dziubinska World Foundry Congress . 2018

机译：铸铝半成品锻造工艺冷却条件的数值和实验研究
5. Numerical simulation of corrosion product deposition onto heat exchange surfaces in sub-cooled boiling conditions. [D] . Carpentier, Helene. 2002

机译：在过冷沸腾条件下腐蚀产物沉积在热交换表面上的数值模拟。
6. Brain Cooling With Ventilation of Cold Air Over Respiratory Tract in Newborn Piglets: An Experimental and Numerical Study [O] . Mohammad Fazel Bakhsheshi, Hadi Vafadar Moradi, Errol E. Stewart, 2015

机译：新生仔猪呼吸道冷空气通气的脑冷却：实验和数值研究
7. Experimental and Numerical Investigation of the Effect of Process Conditions on Residual Wall Thickness and Cooling and Surface Characteristics of Water-Assisted Injection Molded Hollow Products [O] . Hyungpil Park, Baeg-Soon Cha, Byungohk Rhee 2015

机译：工艺条件对水辅注塑中空产品剩余壁厚和冷却和表面特性的实验和数值研究
8. Experimental Testing and Numerical Modeling of Spray Cooling Under Terrestrial Gravity Conditions [R] . Baysinger, K. M. , Yerkes, K. L. , Thomas, S. K. 2005

机译：地球重力条件下喷雾冷却的实验测试与数值模拟

NUMERICAL AND EXPERIMENTAL STUDIES ON THE COOLING CONDITIONS OF CAST ALUMINIUM SEMI-FINISHED PRODUCT FOR FORGING PROCESS

摘要

著录项

相似文献

相关主题

期刊订阅