首页> 外文会议>International Workshop on Breast Imaging >Relationship between compression force, pressure and breast volume in breast tomosynthesis in Brazil
【24h】

Relationship between compression force, pressure and breast volume in breast tomosynthesis in Brazil

机译:巴西乳房断层合成中压力,压力与乳房体积的关系

获取原文

摘要

In this work, images of exams performed in Digital Breast Tomosynthesis (DBT) system were collected retrospectively from 660 Brazilian women, who underwent screening mammography in clinics located in three Brazilian geographic regions. The raw images were processed using the Volpara software, through which the volume and volumetric density of the breast, the contact area between the breast and the tray, the force and pressure of compression and the thickness of the compressed breast were determined, mean breast size was determined by Volpara, resulting in 737 cm3. The compression force had a median of 79.5 N, with a range of 20 to 160 N and a compression pressure of 9.94 kPa, with a range of 2.6 to 29.5 kPa. The analysis of the correlation between the quantities resulted in percentage dense volume and volume with compression force, r = - 0.259 and r= 0.313, respectively (p < 0.01)), percentage dense volume and volume with compression pressure, r = 0.327 and r = -0.478 (p < 0.01), showing that when it is considered an intrinsic characteristic of the breast there is a greater possibility of standardizing compression through compression pressure instead of compression force.
机译:在这项工作中,回顾性地收集了来自660名巴西妇女的数字乳房断层扫描(DBT)系统中进行的检查的图像,这些妇女在位于巴西三个地理区域的诊所进行了乳房X线检查。使用Volpara软件处理原始图像,通过该软件,可以确定乳房的体积和体积密度,乳房与托盘之间的接触面积,压迫力和压力以及压迫乳房的厚度,平均乳房大小由Volpara确定,产生737 cm3。压缩力的中位数为79.5 N,范围为20到160 N,压缩压力为9.94 kPa,范围为2.6到29.5 kPa。对数量之间的相关性进行分析,得出致密体积百分比和带有压缩力的体积分别为r =-0.259和r = 0.313(p <0.01)),具有压缩压力的致密体积百分比和体积为r = 0.327和r = -0.478(p <0.01),表明当将其视为乳房的固有特征时,更有可能通过压缩压力而非压缩力来标准化压缩。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号