• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>Iron Steel Supplement 2005 vol.40: The Joint International Conference of HSLA Steels 2005 and ISUGS 2005 >Development of the Micro-alloyed TRIP Steels and Properties of Their Laser Welded Blanks
【24h】

Development of the Micro-alloyed TRIP Steels and Properties of Their Laser Welded Blanks

机译：微合金TRIP钢的开发及其激光焊接坯料的性能

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Microstructure and properties of low silicon C-Mn-Si-Al-P TRIP (Transformation Induced Plasticity ) steels were studied. The investigated steels were designed with different carbon contents, with or without microalloy element Ti/V. Tensile test and Erichsen test of the investigated steels showed an excellent combination of mechanical property and ductility, with tensile strength between 800MPa and 1000MPa, total elongation of around 20%, and a quite good formability with a dome height of 10mm or so in all cases. Using CO_2 laser welding method, the mechanical properties and formability of laser welds of these micro-alloyed TRIP steels were studied. The ultimate tensile strength and hardness in every position in the laser welds increased with the increase of overall carbon content while the total elongation decreased oppositely. Properties of the laser-welds became worse with the increase of carbon content. All the laser welds were free of cracks and other defeats. The investigated steels showed fairly good welding ability.
机译：研究了低硅C-Mn-Si-Al-P TRIP（相变诱导塑性）钢的组织和性能。研究的钢被设计为具有不同的碳含量，并带有或不带有微合金元素Ti / V。所研究钢材的拉伸试验和Erichsen试验显示出优异的机械性能和延展性组合，其抗拉强度在800MPa至1000MPa之间，总伸长率约为20％，并且在所有情况下的球面高度都在10mm左右，具有很好的成形性。 。采用CO_2激光焊接方法研究了这些微合金TRIP钢的激光焊接性能和力学性能。激光焊缝中每个位置的极限抗拉强度和硬度都随着总碳含量的增加而增加，而总伸长率却相反地降低。随着碳含量的增加，激光焊接的性能变差。所有的激光焊缝均无裂纹和其他缺陷。被调查的钢显示出相当好的焊接能力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号