首页> 外文会议>2006 BIMW >The Effects of Thermo-mechanical Treatment on the Properties of 2519 Aluminum Alloy

【24h】

The Effects of Thermo-mechanical Treatment on the Properties of 2519 Aluminum Alloy

机译：热机械处理对2519铝合金性能的影响

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

A procedure of thermo-mechanical treatment (TMT) was carried out to 2519 aluminum alloy to improve its properties. The influences of cold deformation ratio, ageing temperature and ageing time of the TMT on the mechanical properties and electrochemical corrosion resistance of this alloy were investigated. The results show that after TMT the tensile strength of 2519 aluminum alloy can be improved obviously but its electrochemical corrosion resistance decreases slightly. The optimum processing parameters of the TMT for 2519 aluminum alloy can be described as: solid solution at 530°C for 0.5h, then cold deform witharatioof 15% followed by aging at 150°C for 10h.

机译：对2519铝合金进行了热机械处理（TMT），以改善其性能。研究了TMT的冷变形率，时效温度和时效时间对该合金力学性能和耐电化学腐蚀性能的影响。结果表明，TMT处理后的2519铝合金的抗拉强度明显提高，但其耐电化学腐蚀性能略有下降。 2519铝合金的TMT最佳加工参数可以描述为：在530°C固溶0.5h，然后以15％的比例进行冷变形，然后在150°C时效10h。

著录项

来源
《2006 BIMW》|2007年|P.10271032|共2页
会议地点
作者
Gao-yong LIN; Zhen-feng ZHANG; Qi-quan LIN; Da-shu PENG;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类工程材料一般性问题;
关键词
2519 aluminum alloy; thermo-mechanical treatment (TMT); mechanical properties; electrochemical corrosion;

机译：2519铝合金;热机械处理（TMT）;机械性能;电化学腐蚀;

相似文献

外文文献
中文文献
专利

1. T9I6形变热处理工艺对2519A铝合金组织、力学性能及抗弹性能的影响 [J] . 顾刚, 叶凌英, 蒋海春, 中国有色金属学报（英文版） . 2014,第007期
2. T916形变热处理工艺对2519A铝合金组织、力学性能及抗弹性能的影响 [J] . 顾刚, 叶凌英, 蒋海春, 中国有色金属学报：英文版 . 2014,第007期
3. Effects of Thermo-Mechanical Treatment on the Tensile and Compressive Properties of a Glass-Balloon-Dispersed Aluminum Alloy Composite [J] . Akira Shiga, Osamu Umezawa Materials transactions . 2007,第12期

机译：热机械处理对玻璃气球分散铝合金复合材料拉伸和压缩性能的影响
4. Effects of short aging on thickening anisotropy of θ′ precipitate and mechanical properties of severe cold-rolled 2519A aluminum alloy plate [J] . Xin-ming Zhang, Zhi-guo Gao, Yi-sheng Zhao Journal of Materials Science . 2010,第5期

机译：短时效对2519A严重冷轧铝合金板θ'析出相的各向异性及力学性能的影响
5. Effects of Yb addition on microstructures and mechanical properties of 2519A aluminum alloy plate [J] . ZHANG Xin-ming, WANG Wen-tao, CHEN Ming-an, 中国有色金属学报（英文版） . 2010,第005期
6. The Effects of Thermo-mechanical Treatment on the Properties of 2519 Aluminum Alloy [C] . Gao-yong LIN, Zhen-feng ZHANG, Qi-quan LIN, Conference on Beijing International Materials Week . 2007

机译：热机械处理对2519铝合金性能的影响
7. Dynamic Response of AA2519 Aluminum Alloy under High Strain Rates [D] . Olasumboye, Adewale Taiwo. 2017

机译：高应变速率下AA2519铝合金的动态响应
8. Effects of Deformation Parameters on Microstructural Evolution of 2219 Aluminum Alloy during Intermediate Thermo-Mechanical Treatment Process [O] . Lei Liu, Yunxin Wu, Hai Gong 2018

机译：中间热处理工艺中变形参数对2219铝合金组织演变的影响
9. Effects of thermo-mechanical treatment on the tensile and compressive properties of a glass-balloon-dispersed aluminum alloy composite [O] . Shiga, Akira, Umezawa, Osamu 2007

机译：热处理对玻璃气球分散铝合金复合材料拉伸和压缩性能的影响
10. Effects of Thermal and Thermo-Mechanical Treatments on the Mechanical Properties of Centrifugally Cast Alloy 718 [R] . Michel, D. J., Smith, H. H. 1987

机译：热和热机械处理对离心铸造合金718力学性能的影响

The Effects of Thermo-mechanical Treatment on the Properties of 2519 Aluminum Alloy

摘要

著录项

相似文献

相关主题

期刊订阅