首页> 外文会议>EPD congress;TMS annual meeting exhibition >PHASE COMPOSITION OF SCALE LAYER FORMED DURING CONTINUOUS CASTING
【24h】

PHASE COMPOSITION OF SCALE LAYER FORMED DURING CONTINUOUS CASTING

机译:连铸过程中形成的比例层的相组成

获取原文

摘要

Scale layer can be formed on the slab surface in the areas of secondary cooling and strand discharge during continuous casting process. From 1000°C-1200°C, the influence of steel composition on the stable oxide phases inside scale layer, particularly the types of alloying elements including aluminum, silicon and chromium, is investigated under different partial pressures of water vapor by the calculated predominance diagrams of iron oxide as well as its intermediate compounds formed with other metal oxides, and the stable oxide phase composition within scale layer under the working condition of secondary cooling is discussed. At lower partial pressure of water vapor, only a iron spinel (or ferrosilicate) phase is the stable phase with any alloying element contents in steel composition, whereas the stable phases are FeO and iron spinel (or ferrosilicate) inside the scale layer at higher partial pressures of water vapor.
机译:在连铸过程中,在二次冷却和铸坯排出区域的板坯表面上会形成氧化皮层。通过计算的优势图,研究了钢成分对水垢层中稳定氧化物相(特别是铝,硅和铬等合金元素的类型)在1000°C-1200°C下的影响,并通过计算得出的优势图进行了研究。讨论了氧化铁及其与其他金属氧化物形成的中间化合物的组成,以及在二次冷却的工作条件下氧化皮层内稳定的氧化物相组成。在较低的水蒸气分压下,只有尖晶石铁(或硅酸铁)相是钢成分中任何合金元素含量的稳定相,而在较高分压下,氧化皮层中的稳定相为FeO和尖晶石(或硅酸铁)相。水蒸气的压力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号