Simulation analysis of wire rope drawing based on Abaqus

机译：基于Abaqus的钢丝绳牵引仿真分析

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Steel wire rope is widely used in all walks of life due to its superior strength properties. The steel wire rope in the steel wire core conveyor belt is the skeleton material of the conveyor belt, and plays an important role in the entire conveyor belt. In this article, we studied the steel wire rope in the ST630 steel wire rope conveyor belt. In order to analyze the tensile behavior of the steel wire rope, the two ends of the steel wire rope are simulated in finite element analysis software. The simulation results show that under tensile load, the steel wire rope will have stress concentration. When the force is continuously applied, the stress concentration part will break, and further damage will cause the steel wire rope to eventually break.

机译：钢丝绳由于其优越的强度特性而被广泛应用于各行各业。钢丝芯输送带中的钢丝绳是输送带的骨架材料，在整个输送带中起着重要的作用。在本文中，我们研究了ST630钢丝绳输送带中的钢丝绳。为了分析钢丝绳的拉伸性能，在有限元分析软件中模拟了钢丝绳的两端。仿真结果表明，钢丝绳在拉力作用下会产生应力集中。当持续施加力时，应力集中部分将断裂，进一步的损坏将导致钢丝绳最终断裂。

著录项

来源
《International Conference on Communications, Information System and Computer Engineering》|2020年|365-367|共3页
会议地点
作者
Meili Dai;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类
关键词
Wires; Finite element analysis; Stress; Steel; Information systems; Force; Conferences;

机译：电线;有限元分析;应力;钢;信息系统;力;会议;

相似文献

外文文献
中文文献
专利

1. Small final reductions in the drawing process of rope wires: this study shows that small final reductions of 2 to 3 percent can significantly improve the fatigue limits of a wire versus one drawn with a typical final reduction in the 20 percentrange [J] . Bogdan Golis, Jan W. Pilarczyk, Zbigniew Blazejowski, Wire Journal International . 1999,第4期

机译：钢丝绳拉拔过程中的较小最终减少量：这项研究表明，与通常在20％范围内进行最终减小的情况下，将钢丝绳拉拔过程中的2-3％的较小最终减少量相比，可显着改善钢丝绳的疲劳极限
2. Breaking failure analysis and finite element simulation of wear-out winding hoist wire rope [J] . Chang Xiang-dong, Peng Yu-xing, Zhu Zhen-cai, Engineering failure analysis . 2019,第期

机译：磨损卷绕葫芦钢丝绳的破坏故障分析与有限元模拟
3. Numerical Simulation & Strength Analysis of Wire Rope [J] . Jianfang Sun, Guohui Zhang Wire & cable technology international: Serving Manufacturers, Specifiers and Users of Wire and Cable . 2009,第4期

机译：钢丝绳的数值模拟与强度分析
4. Finite element analysis on the stress state of rope hoisting equipment based on the ABAQUS [C] . Wenzheng Du, Baozhu Ma, Dazhi Cao, 2017 8th International Conference on Mechanical and Intelligent Manufacturing Technologies . 2017

机译：基于ABAQUS的吊装设备应力状态的有限元分析。
5. 3-D Numerical Simulation and Analysis of Complex Fiber Geometry RaFC Materials with High Volume Fraction and High Aspect Ratio based on ABAQUS PYTHON. [D] . Jin, BoCheng. 2011

机译：基于ABAQUS PYTHON的高体积分数和高长径比的复杂纤维几何RaFC材料的3-D数值模拟和分析。
6. A Sensor for Broken Wire Detection of Steel Wire Ropes Based on the Magnetic Concentrating Principle [O] . Yiqing Zhang, Luyang Jing, Weixiao Xu, 2019

机译：基于磁集中原理的钢丝绳断线检测传感器
7. Analysis of fracture modes during extrusion and drawing of bimetal rods or wire. Analytical study of drawing and extrusion of superconducting filamentary wires: fracture problems and evaluation of temperature rise. Final report [O] . B. Avitzur, R. Wu, Y.T. Chou, 1984

机译：双金属杆或钢丝挤出过程中裂缝模式分析。超导丝状线的绘图与挤出的分析研究：裂缝问题及温度升高评价。总结报告
8. Wire Rope Research: Analysis of Bending Fatigue in a 2-Inch IWRC Wire Rope [R] . Miscoe, A. J., McKewan, W. M. 1993

机译：钢丝绳研究：2英寸IWRC钢丝绳弯曲疲劳分析

Simulation analysis of wire rope drawing based on Abaqus

摘要

著录项

相似文献

相关主题

期刊订阅