首页> 外文会议>Automated Optical Inspection for Industry >High-speed cinematography in the investigation of nonlinear oscillation of vibration mill
【24h】

High-speed cinematography in the investigation of nonlinear oscillation of vibration mill

机译:高速摄影技术在振动磨非线性振动研究中的应用

获取原文

摘要

Abstract: For ultra fine particles to be manufactured, vibration mill is one of the most effective machines whose dynamics is the key factor for the efficiency of the mill and the quality of the product and the foundation of the analysis of structural response. Different from the researches presented up to now, this paper deals with the nonlinear dynamics of the high efficiency vibration mill with steel rods as grinding media which has an amplitude up to 15mm and a vibrating strength of 15g. Because it is difficult to measure the system signals, the high-speed cinematography is introduced. By this means it is found that the principal impact is generated between the machine body and the mass center of the grinding media during the operation whose frequency is equal to that of the exciting force. The super and subharmonic vibration components are also observed. The results mentioned above are proved by the frequency spectrum analysis with other method. It can be concluded that high- speed cinematography is efficient and reliable for the research of complex dynamic systems. !8
机译:摘要:对于要制造的超细颗粒,振动研磨机是最有效的机器之一,其动力学是决定研磨机效率,产品质量和结构响应分析基础的关键因素。与目前的研究不同,本文研究了以钢棒为研磨介质的高效振动磨机的非线性动力学,其振幅高达15mm,振动强度为15g。由于难以测量系统信号,因此引入了高速摄影。通过这种方式发现,在运行期间,在主体与研磨介质的质心之间产生的主要冲击的频率等于激振力的频率。还观察到了超谐波和次谐波振动分量。上述结果通过其他方法的频谱分析得到了证明。可以得出结论,高速摄影对于复杂的动态系统的研究是有效和可靠的。 !8

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号