• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议> >Used the Water-in- Oil Emulsion Technology to Recycle the Wasted Oil for the Fuel
【24h】

Used the Water-in- Oil Emulsion Technology to Recycle the Wasted Oil for the Fuel

机译：使用油包水乳化技术回收废油作为燃料

获取原文
获取原文并翻译 | 示例
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Nearly, the OPEC has some uncertain questions to change the price of the international petrodollar. It has a great effect on our lives. For this problem, we suggest a project to solve the inadequate energy resources problem. We used the water-in-oil type for the success of production of stable emulsion fuel. This process could add some wasted oils to high the heat rate. This project will not only decrease the wasted oils but also to reuse them. The Research while used retrieve oil (including heavy oil) and heavy fuel or other fuel put into a surfactant mix at first, mixing the course can be heated. On the other hand, putting into the above-mentioned oil mixing water and another type surfactant, interdependent certain proportion two is mixed. For the mixing environment temperature and mixing time in the course must be considered. After mixing and finishing, store and protect in the thermal insulation material barrel, make emulsification fuel by this way. The goal of this research can improve more than 30% of mixing water amount and oil-economizing rate is in 20% to 25%. The emulsification fuel can keep stable equilibrium during more than three years at the -10℃～115℃ temperature
机译：几乎，欧佩克有一些不确定的问题来改变国际石油美元的价格。它对我们的生活有很大影响。对于这个问题，我们建议一个解决能源资源不足问题的项目。我们使用油包水型来成功生产稳定的乳化燃料。此过程可能会添加一些废油以提高加热速率。该项目将不仅减少废油，而且将其再利用。研究人员首先使用回收油（包括重油）和重燃料或其他燃料将其加入表面活性剂混合物中，然后将混合过程加热。另一方面，将水和另一种类型的表面活性剂放入相互依存的一定比例的两种混合。对于混合环境，必须考虑过程中的温度和混合时间。混合完成后，将其储存在隔热材料桶中并进行保护，以这种方式制成乳化燃料。该研究的目标是可以提高混合水量的30％以上，并且省油率在20％至25％之间。乳化燃料在-10℃〜115℃的温度下可以保持三年以上的稳定平衡

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号