Microstructures and Mechanical Properties of Al-Fe Composites Produced by Plasma Synthesis Method

机译：等离子体合成方法产生的Al-Fe复合材料的微观结构和力学性能

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

The present work was undertaken to highlight a novel in-situ process in which plasma spraying techniques plus electromagnetic stirring were used to produce Al/Al13Fe4 composites consisted of angular and needle-like Al13Fe4 intermetallic compounds of about 10-20μm in size. The microstructures of the fabricated materials depend mainly on the temperature of the melt and the plasma spraying conditions. The formation of intermetallic compounds in the matrix by the plasma synthesis method was examined. In addition, the mechanical properties of the Al/Al13Fe4 composites were examined.

机译：采用本作采用的新型原位过程，其中使用了等离子体喷涂技术加电磁搅拌来生产Al / Al13Fe4复合材料，其由大小约10-20μm的角化和针状Al13Fe4金属间化合物组成。制造材料的微观结构主要取决于熔体的温度和等离子体喷涂条件。研究了通过血浆合成方法在基质中形成金属间化合物。此外，检查了Al / Al13Fe4复合材料的机械性能。

著录项

来源
《International conference on aluminium alloy》|2004年||共6页
会议地点
作者

展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类金属冶炼;
关键词
plasma spraying; Fe powder; Al13Fe4 intermetallic compounds; in-situ composites;

机译：等离子体喷涂;Fe powder;Al13Fe4金属间化合物;原位复合材料;

相似文献

外文文献
中文文献
专利

1. 爆炸焊接Al-Fe啮合界面的微观结构和力学性能 [J] . 杨明, 马宏昊, 沈兆武, 中国有色金属学报（英文版） . 2019,第004期
2. 爆炸焊接Al-Fe啮合界面的微观结构和力学性能 [J] . 杨明, 马宏昊, 沈兆武, 中国有色金属学报：英文版 . 2019,第004期
3. Microstructure and mechanical properties of Al-Fe in situ nanocomposite produced by friction stir processing [J] . I.S. Lee, P.W. Kao, NJ. Ho Intermetallics . 2008,第9期

机译：搅拌摩擦法制备Al-Fe原位纳米复合材料的组织和力学性能
4. Microstructures and mechanical properties of Al{sub}3Fe reinforced aluminum matrix composites fabricated by a plasma synthesis method [J] . Jung-Moo Lee, Suk-Bong Kang, Tatsuo Sato, Materials transactions . 2002,第10期

机译：等离子体合成法制备Al {sub} 3Fe增强铝基复合材料的组织和力学性能
5. Fabrication, microstructure and mechanical properties of Al-Fe intermetallic particle reinforced Al-based composites [J] . Yang Xue, Rujuan Shen, Song Ni Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics . 2015,第Null期

机译：Al-Fe金属间颗粒增强Al基复合材料的制备，显微组织和力学性能
6. Microstructures and Mechanical Properties of Al-Fe Composites Produced by Plasma Synthesis Method [C] . J-M. Lee, S-B. Kang, C-Y. Lim, Materials forum - aluminium alloys, their physical and mechanical properties - Volume 28 - 2004 . 2004

机译：等离子体合成法制备Al-Fe复合材料的组织和力学性能
7. The Microstructure and Properties of Plasma Sprayed Ceramic Composites. [D] . LaPierre, Kerry James. 2010

机译：等离子喷涂陶瓷复合材料的微观结构和性能。
8. Influence of Ti3C2Tx MXene and Surface-Modified Ti3C2Tx MXene Addition on Microstructure and Mechanical Properties of Silicon Carbide Composites Sintered via Spark Plasma Sintering Method [O] . Mateusz Petrus, Jarosław Woźniak, Tomasz Cygan, 2021

机译：通过火花等离子体烧结法烧结碳化硅复合材料微观结构和机械性能的Ti3C2Tx mx12和表面改性Ti3C2Tx Mx的影响
9. In-Situ Synthesis, Microstructure, and Mechanical Properties of TiB2-Reinforced Fe-Cr-Mn-Al Steel Matrix Composites Prepared by Spark Plasma Sintering [O] . Jian Liu, Min Wu, Jian Chen, 2021

机译：由火花等离子体烧结制备的TIB2增强Fe-Cr-Mn-Al钢基复合材料的原位合成，微观结构和机械性能
10. Microstructure and mechanical properties of Ni(sub 3)Al(endash)Al(sub 2)O(sub 3) composites produced by hot extrusion. [R] . McKamey, C. G., Lee, E. H. 1990

机译：热挤压生产Ni（sub 3）al（endash）al（sub 2）O（sub 3）复合材料的微观结构和力学性能。

Microstructures and Mechanical Properties of Al-Fe Composites Produced by Plasma Synthesis Method

摘要

著录项

相似文献

相关主题

期刊订阅