• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>International Conference on Material Science and Engineering >Experimental Study on Electro-Discharge Machining of Nickel-Based Superalloy
【24h】

Experimental Study on Electro-Discharge Machining of Nickel-Based Superalloy

机译：镍高超合金电放电加工试验研究

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

The present work attempts to study the effect of important process parameters on material removal rate in electro-discharge machining of nickel-based superalloy. Experiments based on orthogonal array were conducted. Contents of peak current, pulse on time, duty cycle, and servo voltage were the main factors, and each factor was endowed three levels. Range analysis was used to investigate the orthogonal test on material removal rate, and a set of appropriate parameters were found. Confirmation test was conducted to validate the analysis and it can be seen that the predicted values show good agreement with the experimental results. The outcome of the present research work will be a considerable aid to industries for efficiency improvement in processing using EDM.
机译：目前的作品试图研究重要的工艺参数对镍基超合金电放加工中的材料去除率的影响。 进行了基于正交阵列的实验。 峰值电流的内容，脉冲按时，占空比和伺服电压是主要因素，每个因素都赋予了三个级别。 范围分析用于研究材料去除率的正交试验，并发现一组适当的参数。 进行确认测试以验证分析，可以看出，预测值与实验结果显示出良好的一致性。 本研究工作的结果将是对使用EDM加工效率提高的相当大的辅助。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号