• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>International Conference on Manufacturing Science and Technology >Processing Temperature of Sustainable Polymer with Thermoplastics by Injection Molding (Part 2)
【24h】

Processing Temperature of Sustainable Polymer with Thermoplastics by Injection Molding (Part 2)

机译：通过注塑成型加工可持续聚合物的温度（第2部分）

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Moving to a more sustainable and healthy future, the world has decided to invest on researches to make good use of waste vegetable oil rather than letting them clog the drains and hence, polluting the environment. One of the useful projects which uses these waste cooking oil is to synthesize polyols. Solidifying the polyols using cross linker produces a Sustainable Polymer (SP). These SP are compounded with the High-Density Polyethylene (HDPE) by melt-mixing using injection molding machine. Injection molding is capable of producing many useful products. Therefore, aiming to analyse the processing conditions of injection molding, the corresponding mechanical properties of the compounds produced were examined. The results indicated that increasing the SP content will increase the toughness of the compound if compared to neat HDPE. It was concluded that the processing temperature and composition of SP will both influence the quality and mechanical behavior of the injected polymer compounds.
机译：迁移到更加可持续和健康的未来，世界各地决定投资研究，以利用废植物油，而不是让他们堵塞排水管，从而污染环境。使用这些废物油的有用项目之一是合成多元醇。使用交联剂凝固多元醇产生可持续的聚合物（SP）。通过注塑机熔融混合，将这些SP与高密度聚乙烯（HDPE）混合。注塑成型能够产生许多有用的产品。因此，旨在分析注射成型的加工条件，检查所生化合物的相应力学性质。结果表明，与整齐的HDPE相比，增加SP含量会增加化合物的韧性。得出结论是，SP的加工温度和组成既会影响注射聚合物化合物的质量和力学行为。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号