首页> 外文会议>International Conference on Advances in Materials and Manufacturing >Effects of PP-g-MA and epoxy resin on Morphology and Mechanical Properties of the PP/LGF composites
【24h】

Effects of PP-g-MA and epoxy resin on Morphology and Mechanical Properties of the PP/LGF composites

机译:PP-G-MA和环氧树脂对PP / LGF复合材料形态和力学性能的影响

获取原文

摘要

The effects of polypropylene grafted with maleic anhydride (PP-g-MA) and epoxy resin (ER) on the interfacial interaction of the long glass fiber reinforced PP composites were investigated by means of scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and mechanical properties. The experimental results demonstrate that PP-g-MA and ER could effectively improve interfacial interaction between the PP and LGF. Based on SEM, good interfacial adhesion between PP and LGF in PP/PP-g-MA/ER/LGF composite was observed. DSC results showed that the existence of PP-g-MA or ER caused crystallization temperature shift to low temperature, and melting temperature shift to high temperature. All results in this paper were consistent, and showed the good interaction between PP and LGF, which were proved by the mechanical properties of the composites.
机译:通过扫描电子显微镜(SEM),通过扫描电子显微镜(SEM),研究了用马来酸酐(PP-G-MA)和环氧树脂(ER)对长玻璃纤维增​​强PP复合材料的界面相互作用的影响。差示扫描量热法(DSC )和机械性能。实验结果表明,PP-G-MA和ER可以有效地改善PP和LGF之间的界面相互作用。基于SEM,观察到PP / PP-G-MA / ER / LGF复合材料中PP和LGF之间的良好界面粘附。 DSC结果表明,PP-G-MA或ER的存在使得结晶温度转移到低温,熔化温度转变为高温。本文的所有结果一致,并显示PP和LGF之间的良好相互作用,其通过复合材料的机械性能证明。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号