首页> 外文会议>Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications VI; Progress in Biomedical Optics and Imaging; vol.7 no.6 >Theoretical and Experimental Investigations of Metal Sulfide Dielectric Coatings for Hollow Waveguides
【24h】

Theoretical and Experimental Investigations of Metal Sulfide Dielectric Coatings for Hollow Waveguides

机译:中空波导金属硫化物介电涂层的理论和实验研究

获取原文
获取原文并翻译 | 示例

摘要

Continues efforts to develop low loss flexible waveguides, to transmit mid IR laser energy for minimal invasive surgical and diagnostic procedures, have been carried out by us and other groups in this area. We have introduced sulfide dielectric films coated over an Ag reflecting layer as another potential solution. The metal sulfides used, have high transparency in the infra red spectrum and their thickness can be tailored to minimize the attenuation over a selected wavelength range. The high refractive index contrast of the two metal sulfide materials enable to produce multi layer hollow waveguides. These waveguide will have low attenuation in both straight and bent conditions, low sensitivity to coupling and to surface roughness and a broad wavelength range. The straight lowest loss measured at 1.55 μm for a 1,000-μm bore Ag/CdS/PbS/CdS HGW was 0.06 dB/m. This loss is three times less than that measured for a single layer Ag/CdS coated HGW at 1.55μm. A theoretical simulation applying the same conditions showed the same pattern with a good potential for improvement.
机译:我们和该领域的其他组织已继续努力开发低损耗的柔性波导,以传输中红外激光能量,从而以最小的侵入性外科手术和诊断程序进行治疗。我们已经介绍了在Ag反射层上涂覆的硫化物介电膜,作为另一种可能的解决方案。所使用的金属硫化物在红外光谱中具有很高的透明度,并且可以对其厚度进行调整,以使在选定波长范围内的衰减最小。两种金属硫化物材料的高折射率对比使得能够制造多层空心波导。这些波导在直线和弯曲条件下均具有低衰减,对耦合,表面粗糙度和宽波长范围的灵敏度较低。对于孔径为1,000μm的Ag / CdS / PbS / CdS HGW,在1.55μm处测得的直线最低损耗为0.06 dB / m。该损耗比单层Ag / CdS涂层的HGW的1.55μm损耗小三倍。应用相同条件的理论模拟显示出相同的模式,具有改进的潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号