Influence of Trace Boron and Cooling Rate on The Thermal Embrittlement of 2.25Cr-1 Mo Steel

机译：微量硼和冷却速率对2.25Cr-1 Mo钢热脆化的影响

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

The influence of trace boron and cooling rate on the thermal embrittlement of 2.25Cr -1Mo steel was investigated by thermo-mechanical simulator and SEM analysis. It was proved that the trough in the thermo-ductility curve located between 1000℃ and 700℃ and shifted to lower temperature and the temperature range of the trough became shallow and narrow as the boron content increased. When the cooling rate decreased, the ductility trough became shallow and narrow too. This made the steel free of surface crack in CC process.

机译：通过热机械模拟器和SEM分析研究了痕量硼和冷却速率对2.25Cr -1Mo钢热脆性的影响。结果表明，随着硼含量的增加，热导率曲线中的波谷处于1000〜700℃之间并向较低温度移动，波谷的温度范围变窄。当冷却速度降低时，延性槽也变浅和变窄。这使得钢在CC工艺中没有表面裂纹。

著录项

来源
《Pacific Rim International Conference on Advanced Materials and Processing(PRICM 5) pt.1; 20041102-05; Beijing(CN)》|2004年|P.241-244|共4页
会议地点 Beijing(CN)
作者
A. M. Guo; Z. X. Yuan; W. X. Yuan;
展开▼
作者单位

School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类工程材料一般性问题;
关键词
boron; thermal embrittlement; grain boundary segregation; 2.25CM Mo steel;

机译：硼;热脆化;晶界偏析; 2.25CM Mo钢;

相似文献

外文文献
中文文献
专利

1. Influence of cooling rate and boron content on the microstructure and mechanical properties of hot-rolled high strength interstitial-free steels [J] . S. I. Kim, Y. Lee Metals and Materials International . 2012,第5期

机译：冷却速度和硼含量对热轧高强度无间隙钢的组织和力学性能的影响
2. Influence of Cooling Rate and Boron Content on the Microstructure and Mechanical Properties of Hot-Rolled High Strength Interstitial-Free Steels [J] . S. I. Kim, Y. Lee Metals and Materials International . 2012,第5期

机译：冷却速度和硼含量对热轧高强度无间隙钢的组织和力学性能的影响
3. Positron study of radiation embrittlement of steels used in water cooled, water moderated energy reactors [J] . Slugen V, Zeman A, Petriska M, Applied Surface Science . 2006,第9期

机译：用于水冷，水缓和能源反应堆的钢的辐射脆化的正电子研究
4. Influence of Trace Boron and Cooling Rate on The Thermal Embrittlement of 2.25Cr-1Mo Steel [C] . A. M. Guo, Z. X. Yuan, W. X. Yuan Pacific Rim International Conference on Advanced Materials and Processing . 2005

机译：痕量硼和冷却速率对2.25Cr-1Mo钢的热脆化的影响
5. Modelling of the thermal evolution of steel strips cooled in the hot rolling runout table. [D] . Hernandez-Avila, Victor Hugo. 1999

机译：在热轧跳动表中冷却的钢带的热演化模型。
6. Mechanical and Thermal Influences on Microstructural and Mechanical Properties during Process-Integrated Thermomechanically Controlled Forging of Tempering Steel AISI 4140 [O] . Bernd-Arno Behrens, Kai Brunotte, Tom Petersen, 2020

机译：加工钢铁AISI 4140过程集成热机控锻造过程中微观结构和机械性能的机械和热影响
7. Influence of Boron and Nitrogen Contents on Strength and Toughness of Controlled-rolled and Acceleratedly-Cooled Low Carbon Steel [O] . Yasufumi FUJISHIRO, Tamotsu HASHIMOTO, Hiroo OHTANI 1989

机译：硼和氮素含量对控制轧制和加速冷却低碳钢的强度和韧性的影响
8. Influence of Thermal Neutrons on Embrittlement of the Liner Steel of High-Temperature Reactors (HTR) [R] . Alberman, A., Pepin, P., Soulat, P. 1983

机译：热中子对高温反应堆（HTR）衬里钢脆性的影响

Influence of Trace Boron and Cooling Rate on The Thermal Embrittlement of 2.25Cr-1 Mo Steel

摘要

著录项

相似文献

相关主题

期刊订阅