首页> 外文会议>Proceedings of 4th International Workshop on Piezoelectric Materials and Applications in Actuators >Normal Sintering of Li/Ta Co-doped (K,Na)NbO3 Lead-free Piezoceramics:Processing Effect on Phase Transitions and Densification
【24h】

Normal Sintering of Li/Ta Co-doped (K,Na)NbO3 Lead-free Piezoceramics:Processing Effect on Phase Transitions and Densification

机译:Li / Ta共掺杂(K,Na)NbO3无铅压电陶瓷的正常烧结:工艺对相变和致密化的影响

获取原文
获取原文并翻译 | 示例

摘要

(K,Na)NbO3-based system is considered to be one of the best alternatives as lead-free piezoceramics,but its performance is extremely sensitive to fabrication process,which is mainly due to serious volatilization of alkali components during sintering.In this study,the effect of local sintering atmosphere on the densification and phase structure of lead-free piezoceramics with a nominal composition of (Li0.04K0.44Na0.52)(Nb0.85Ta0.15)O3 were studied.It was found thatdensification of (K,Na)NbO3-based ceramics occurs due to liquid phase sintering mechanism and the volatilization plays a role to generate the liquid phase.However,the volatilization causes the compositional deviation and hence affects the phase structure and piezoelectric properties of the resultant ceramics.Finally,a special sintering method was employed to control the volatilization and densification,which produced a lead-free piezoceramic sample with high piezoelectric coefficient d33 up to 251pC/N.
机译:(K,Na)NbO3基体系被认为是无铅压电陶瓷的最佳替代品之一,但其性能对制造过程极为敏感,这主要是由于烧结过程中碱成分的严重挥发所致。研究了局部烧结气氛对标称成分为(Li0.04K0.44Na0.52)(Nb0.85Ta0.15)O3的无铅压电陶瓷致密化和相结构的影响。发现(K ,Na)NbO3基陶瓷是由于液相烧结机理而产生的,挥发作用起液相的作用。但是,挥发会导致组成偏差,从而影响所得陶瓷的相结构和压电性能。采用特殊的烧结方法控制挥发和致密化,制备出压电系数d33高达251pC / N的无铅压电陶瓷样品。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号