Thermal and Mechanical Properties of Film Sheet from PLA/ENR Blends using Rutile TiO2 as Fillers

机译：以金红石型TiO2为填充剂的PLA / ENR共混物薄膜片的热力学性能

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

The aim of this research was to reduce the brittle and increase the toughness of polylactic acid (PLA) by adding epoxidized natural rubber (ENR)[1].ENR with epoxidation content of 33 mol％ was mixed in chloroform solvent at room temperature for preparation of film.The film was formed by casting a film sheet.Mechanical tests showed that the introduction of ENR reduced the tensile strength but enhanced the elongation of PLA.The tensile strength and elongation at break of the PLA/ENR ratio of PLA (15 wt％ stock solution) / ENR (3 wt％ stock solution) (80/20) were 12.52 N/mm2 and 224％,respectively.

机译：本研究的目的是通过添加环氧化天然橡胶（ENR）来减少聚乳酸（PLA）的脆性并提高其韧性[1]。在室温下，将环氧化含量为33 mol％的ENR与氯仿溶剂混合制备机械测试表明，ENR的引入降低了拉伸强度，但提高了PLA的伸长率.PLA / ENR的拉伸强度和断裂伸长率（EN = 15 wt％）％的原液）/ ENR（3％的原液）（80/20）分别为12.52 N / mm2和224％。

著录项

来源
《Proceedings of the Sixth Asia-Europe symposium on processing and properties of reinforced polymers》|2013年|192-193|共2页
会议地点 Wuhan(CN)
作者
P.Nuinu; S.Somla; S.Saengsuwan;
展开▼
作者单位

Rubber Science and Technology Program, Department of Chemistry, Faculty of Science, Ubon Ratchathani University, Warin chamrap, Ubon Ratchathani, 34190, Thailand;

Rubber Science and Technology Program, Department of Chemistry, Faculty of Science, Ubon Ratchathani University, Warin chamrap, Ubon Ratchathani, 34190, Thailand;

Laboratory of Advanced Polymers for Energy and Biomedical Applications(LAPEBA)Department of Chemistry, Faculty of Science, Ubon Ratchathani University, Warin chamrap, Ubon Ratchathani, 34190, Thailand;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类高分子化学（高聚物）;
关键词
Poly(lactic acid); Epoxidized natural rubber; Titanium dioxide;

机译：聚乳酸环氧天然橡胶；二氧化钛;

相似文献

外文文献
中文文献
专利

1. TiO2/polystyrene core-shell nanoparticles as fillers for LLDPE/PLA blend: development, and morphological, thermal and mechanical properties [J] . Shimpi Navinchandra G., Borane Mahesh, Mishra Satyendra Polymer bulletin . 2016,第11期

机译：TiO2 /聚苯乙烯核壳纳米粒子作为LLDPE / PLA共混物的填料：显影以及形态，热和机械性能
2. The Effect of TiO2 Filler Content on the Mechanical, Thermal, and Tribological Properties of TiO2/PPS Composites [J] . Mustafa Ozgur Bora, Onur Coban, Egemen Avcu Polymer Composites . 2013,第10期

机译：TiO2填料含量对TiO2 / PPS复合材料的力学，热学和摩擦学性能的影响
3. The influence of the dispersed phase on the morphology, mechanical and thermal properties of PLA/PE-LD and PLA/PE-HD polymer blends and their nanocomposites with TiO2 and CaCO3 [J] . Milovanovic Vedrana Lovincic, Hajdinjak Ivana, Lovrisa Ivona, Polymer engineering and science . 2019,第7期

机译：分散相对PLA / PE-LD和PLA / PE-HD聚合物共混物的形态，机械和热性能及其纳米复合材料与TiO2和CaCO3
4. Thermal and Mechanical Properties of Film Sheet from PLA/ENR Blends using Rutile TiO2 as Fillers [C] . P.Nuinu, S.Somla, S.Saengsuwan Asia-Europe symposium on processing and properties . 2013

机译：使用金红石TiO2作为填料的PLA / ENR的薄膜片的热和力学性能
5. Analysis of the mechanical properties of biodegradable films made from blends of polylactic acid (PLA) and polybutylene succinate adipate random copolymer by blown film extrusion. [D] . Laverde, German V. 1997

机译：通过吹膜挤出分析聚乳酸（PLA）和聚丁二酸丁二酸丁二酯无规共聚物的共混物制成的可生物降解薄膜的机械性能。
6. Physico-mechanical analysis data in support of compatibility of chitosan/κ-carrageenan polyelectrolyte films achieved by ascorbic acid and the thermal degradation theory of κ-carrageenan influencing the properties of its blends [O] . Mahdiyar Shahbazi, Rammile Ettelaie, Ghadir Rajabzadeh 2016

机译：支持抗坏血酸获得的壳聚糖/κ-角叉菜胶聚电解质膜相容性的物理力学分析数据以及κ-角叉菜胶的热降解理论对其共混物性能的影响
7. The Effect of Rubber on Morphology, Thermal Properties and Mechanical Properties of PLA/NR and PLA/ENR Blends [O] . Pongtanayut K., Thongpin C., Santawitee O. 2013

机译：橡胶对PLA / NR和PLA / ENR共混物形态，热性能和力学性能的影响

Thermal and Mechanical Properties of Film Sheet from PLA/ENR Blends using Rutile TiO2 as Fillers

摘要

著录项

相似文献

相关主题

期刊订阅