Thermo-Mechanical Modelling of Continuous Casting Primary Zones

机译：连铸主区的热力模拟

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

The aim of this work is to present a modelling approach to thermo-mechanicalrnanalysis of the solidifying shell in the primary zone, as met in thin slab continuousrncasting process with the mould of non-constant cross-section subjected tornoscillation. The thermo-mechanical problem considered in the Eulerian referencernframe is treated as uncoupled, with the temperature and stress-strain fields beingrnsteady-state and cyclic steady-state, respectively. For validation of the developedrnnumerical model the respective process simulation results are compared with thernavailable measurements. Considering that great capability of the model in achievingrna better physical insight into the complex thermo-mechanical behaviour inrncontinuous casting is confirmed, the model can be used not only for direct analysisrnpurposes, but above all for an advanced technology design involving a processrnparameters prescription and the mould's internal geometry determination, as well asrncorresponding optimization tasks.

机译：这项工作的目的是提出一种对主要区域中的凝固壳进行热机械分析的建模方法，这在薄板坯连续铸造工艺中遇到，非恒定横截面的模具经历了超晶格振动。在欧拉参考框架中考虑的热机械问题被视为不耦合的，温度和应力应变场分别为稳态和循环稳态。为了验证所开发的数值模型，将各自的过程模拟结果与可用的测量结果进行比较。考虑到该模型具有很大的能力，可以确认对复杂的热力学行为不连续铸造的更好的物理洞察力，因此该模型不仅可以用于直接分析目的，而且还可以用于涉及工艺参数处方和模具设计的先进技术设计内部几何形状确定以及相应的优化任务。

著录项

来源
《Proceedings of the Thirteenth international conference on civil, structural and environmental engineering computing》|2011年|p.1-18|共18页
会议地点 Chania(GR);Chania(GR)
作者
M. Halilovi?; N. Mole; B. ?tok;
展开▼
作者单位

Laboratory for Numerical Modelling and Simulation Faculty of Mechanical Engineering University of Ljubljana, Slovenia;

Laboratory for Numerical Modelling and Simulation Faculty of Mechanical Engineering University of Ljubljana, Slovenia;

Laboratory for Numerical Modelling and Simulation Faculty of Mechanical Engineering University of Ljubljana, Slovenia;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类市政工程;
关键词
continuous casting; thermo-mechanical analysis; thin slab production; cyclic steady-state; mould oscillation;

机译：连铸；热力学分析；薄板坯生产；循环稳态；结晶器振动;

相似文献

外文文献
中文文献
专利

1. A Comparison of Models Describing Heat Transfer in the Primary Cooling Zone of a Continuous Casting Machine [J] . K. Mi?kowska-Piszczek, M. Rywotycki, J. Falkus, Archives of Metallurgy and Materials . 2015,第1期

机译：连铸机初冷区传热模型的比较
2. A COMPARISON OF MODELS DESCRIBING HEAT TRANSFER IN THE PRIMARY COOLING ZONE OF A CONTINUOUS CASTING MACHINE [J] . Milkowska-Piszczek K., Rywotycki M., Falkus J., Archives of Metallurgy and Materials . 2015,第1期

机译：一种模型描述连续铸造机初级冷却区传热的模型
3. Determination of optimal taper in continuous casting billet mould using thermo-mechanical models of mould and billet [J] . Chakraborty Saurav, Ganguly Suvankar, Talukdar Prabal Journal of Materials Processing Technology . 2019,第期

机译：使用模具和坯料热机械模型测定连铸坯料模具的最佳锥度
4. Three-dimensional Thermo-mechanical Modeling of Steel during Primary Cooling in Continuous Casting [C] . M. Henri, M. Bobadilla, M. Bellet International Symposium on Liquid Metal Processing and Casting . 2007

机译：连续铸造初级冷却期间钢三维热机械建模
5. Efficient thermo-mechanical model for solidification processes and its applications in steel continuous casting. [D] . Koric, Seid. 2006

机译：凝固过程的有效热力学模型及其在钢连续铸造中的应用。
6. Lattice Boltzmann Method Modeling of Flow Structuresand Level Fluctuations in a Continuous Casting Process [O] . Peng Zhao, *, Bin Yang, 2019

机译：流动结构的格子Boltzmann方法建模连铸过程中的水平和水平波动
7. A Comparison of Models Describing Heat Transfer in the Primary Cooling Zone of a Continuous Casting Machine [O] . Miłkowska-Piszczek K., Rywotycki M., Falkus J., 2015

机译：连铸机主冷却区传热模型的比较

Thermo-Mechanical Modelling of Continuous Casting Primary Zones

摘要

著录项

相似文献

相关主题

期刊订阅