首页> 外文会议>Reliability of photonics materials and structures >Optical fiber strength and its relationship to dynamic mechanical properties of fiber coatings by direct measurements on fibers

【24h】

Optical fiber strength and its relationship to dynamic mechanical properties of fiber coatings by direct measurements on fibers

机译：通过直接测量纤维的光纤强度及其与纤维涂层动态力学性能的关系

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

While the telecommunications optical fiber technology is in its third decade of growth, and fibers that are aging-resistant and fatigue-resistant are highly desirable, basic physico-chemical aspects of fiber aging and mechanical strength degradation are not well understood. A key difficulty to understanding fiber strength degradation has been the unavailability of tools for direct assessment of the condition of fiber coatings on aged fibers. In this presentation, we report on our studies of the effects of DI-water aging on two experimental high n-value (fatigue-resistant) fibers and their coatings. We have found that the coatings of these high n value fibers are highly resistant to DI-water aging.

机译：尽管电信光纤技术正处于发展的第三个十年，并且非常需要耐老化和耐疲劳的光纤，但对于光纤老化和机械强度下降的基本理化方面却知之甚少。理解纤维强度降低的关键困难是无法获得直接评估老化纤维上纤维涂层状况的工具。在本演讲中，我们报告了去离子水老化对两种实验性高n值（抗疲劳）纤维及其涂层的影响的研究报告。我们发现这些高n值纤维的涂层具有很高的抗去离子水老化性。

著录项

来源
《Reliability of photonics materials and structures》|1998年|p.301-307|共7页
会议地点 San Francisco CA(US)
作者
O.S. Gebizlioglu; C.R. Kurkjian;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类一般工业技术;
关键词

相似文献

外文文献
中文文献
专利

1. Microstructure and mechanical properties of carbon fibers strengthened Ni-based coatings by laser cladding: The effect of carbon fiber contents [J] . Shi Chuan, Lei Jianbo, Zhou Shengfeng, Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics . 2018,第期

机译：碳纤维的微观结构和力学性能强化激光熔覆Ni基涂层：碳纤维含量的影响
2. SIMULTANEOUS MEASUREMENT OF OPTICAL AND DYNAMIC MECHANICAL PROPERTIES OF PLASTIC OPTICAL FIBERS [J] . SALAH S. MUSBAH, LJILJANA M. BRAJOVI? Chemical Industry Chemical Engineering Quarterly . 2010,第4期

机译：同时测量塑料光纤的光学和动态力学性能
3. Determination of interfacial shear strength between the glass fiber and primary coating in double-coated optical fibers from mechanical strip forces [J] . Shiue ST. Applied optics . 2002,第9期

机译：通过机械剥离力确定双层光纤中玻璃纤维和底涂层之间的界面剪切强度
4. Optical fiber strength and its relationship to dynamic mechanical properties of fiber coatings by direct measurements on fibers [C] . O.S. Gebizlioglu, C.R. Kurkjian, Materials Research Society Symposium on reliability of photonics materials and structures . 1998

机译：光纤强度及其与纤维涂层的动态力学性能的关系
5. RIGID-ROD POLYQUINOLINES: SYNTHESIS, STRUCTURE-PROPERTY RELATIONSHIPS AND HIGH-STRENGTH FIBERS. [D] . SYBERT, PAUL DEAN. 1980

机译：刚性多喹啉：合成，结构-性能关系和高强度纤维。
6. Polymer Optical Fiber Bragg Gratings in CYTOP Fibers for Angle Measurement with Dynamic Compensation [O] . Arnaldo Leal-Junior, Antreas Theodosiou, Camilo Díaz, 2018

机译：CYTOP光纤中的聚合物光纤布拉格光栅用于动态补偿角度测量
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Effect of fiber coating on mechanical properties of Nicalon fibers and Nicalon-fiber/SiC matrix composites. [R] . Singh, J. P., Singh, D., Lowden, R. A. 1993

机译：纤维涂层对Nicalon纤维和Nicalon纤维/ siC基复合材料力学性能的影响。

Optical fiber strength and its relationship to dynamic mechanical properties of fiber coatings by direct measurements on fibers

摘要

著录项

相似文献

相关主题

期刊订阅