首页> 外文会议>Researches in Powder Metallurgy >Research about Obtaining Porous Sintered Multilayer Materials from Stainless Steel Powders

【24h】

Research about Obtaining Porous Sintered Multilayer Materials from Stainless Steel Powders

机译：由不锈钢粉末获得多孔烧结多层材料的研究

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

Porous samples under the form of disc tablets, 23 mm in diameter and approximately 2 mm thick, were made by freely spreading and then sintering stainless steel powder (316 L). The powder fraction used and the sintering time are the parameters that were varied in order to study their influence on the main structural characteristics. Different powder size ranges were used. The multilayer structure was obtained by freely spreading different particles size ranges -40μm and 100 -125μm in alternative layers. The narrow range (-40μm) of particles was used to obtain a thin layer (0,5mm) intended for small pores size and to maintain the permeability of samples in acceptable limits. The sintered structure was investigated by electron microscopy and mercury porosimetry.

机译：通过自由散布然后烧结不锈钢粉末（316 L），制成直径23毫米，厚约2毫米的圆盘片剂形式的多孔样品。为了研究它们对主要结构特征的影响，使用了不同的粉末分数和烧结时间。使用了不同的粉末尺寸范围。通过在替代层中自由散布-40μm和100-125μm的不同粒径范围来获得多层结构。窄范围（-40μm）的颗粒用于获得旨在用于小孔尺寸的薄层（0.5mm），并将样品的渗透性维持在可接受的范围内。通过电子显微镜和水银孔率法研究了烧结结构。

著录项

来源
《Researches in Powder Metallurgy》|2009年|p.161-164|共4页
会议地点 Craiova(RO);Craiova(RO)
作者
loan Vida -Simiti; Nicolaje Jumate; Artur Cotetiu; Trandafir Bolog;
展开▼
作者单位

Technical University of Cluj-Napoca, Materials Science and Technology Department,Cluj-Napoca, Romania;

Technical University of Cluj-Napoca, Materials Science and Technology Department,Cluj-Napoca, Romania;

Technical University of Cluj-Napoca, Materials Science and Technology Department,Cluj-Napoca, Romania;

Technical University of Cluj-Napoca, Materials Science and Technology Department,Cluj-Napoca, Romania;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类粉末冶金（金属陶瓷工艺）;
关键词
pores size; permeability; sintered materials; porous multilayer materials;

机译：毛孔大小渗透性烧结材料多孔多层材料;

相似文献

外文文献
中文文献
专利

1. Research about Obtaining Porous Sintered Multilayer Materials from Stainless Steel Powders [J] . loan Vida -Simiti, Nicolaje Jumate, Artur Cotetiu, Materials Science Forum . 2011,第期

机译：由不锈钢粉末获得多孔烧结多层材料的研究
2. Capillary performance characterization of porous sintered stainless steel powder wicks for stainless steel heat pipes [J] . Shiwei Zhang, Can Chen, Gong Chen, International Communications in Heat and Mass Transfer . 2020,第Jula期

机译：不锈钢热管多孔烧结不锈钢粉灯的毛细管性能表征
3. Stryctyre formation of the austenitic stainless steels based materials during sintering. I. sintering of austenitic stainless steel-based materials with addition of Cr_3C_2 [J] . Napara-Volgina S.G., Orlova L.N., Mamonova A.A. Порошковая Металлургия . 1997,第1a2期

机译：烧结过程中奥氏体不锈钢基材料的斯太克尔形成。 I.添加Cr_3C_2的奥氏体不锈钢基材料的烧结
4. Stainless Steels Sintered form the Mixture of Prealloyed Stainless Steel and Alloying Element Powders [C] . Zbigniew Brytan, Marco Actis Grande, Mario Rosso, Researches in Powder Metallurgy . 2009

机译：预烧结不锈钢和合金元素粉末的混合物烧结而成的不锈钢
5. The Collision of Water and n-Heptane Droplets on Heated Sintered Porous Stainless-steel Surfaces [D] . Lipson, Nicholas 2018

机译：水和正庚烷液滴在加热的烧结多孔不锈钢表面上的碰撞
6. Semisolid State Sintering Behavior of Aluminum–Stainless Steel 316L Composite Materials by Powder Metallurgy [O] . Kwangjae Park, Dasom Kim, Kyungju Kim, 2019

机译：粉末冶金法对铝-不锈钢316L复合材料的半固态烧结行为
7. Powder Materials. High-temperature Oxidation Resistance of Sintered Stainless Steels. [O] . Tetsuya Kondo, Makoto Kawamura, Takayoshi Shimizu, 1998

机译：粉末材料。烧结不锈钢的高温氧化抗性。
8. Powder Metallurgy, Manufacture of A1M3 Erosion Test Nozzles from Sintered Copper, Iron and Stainless Steel Powders [R] . Burghardt, A. M., Gebhardt, L. F. 1948

机译：粉末冶金，从烧结铜，铁，不锈钢粉末a1m3腐蚀试验喷嘴制造

Research about Obtaining Porous Sintered Multilayer Materials from Stainless Steel Powders

摘要

著录项

相似文献

相关主题

期刊订阅