STUDY ON THE PROPERTIES OF GEAR DISK IN CO-ROTATING TWIN SCREW EXTRUDER

机译：同向双螺杆挤出机中齿轮盘性能的研究

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

Gear disk is one of the most important mixing screw elements. It can meet the demand in distribution mixing of filler in polymer, and can be used in co-rotating twin-screw extruder with other screw elements in different configurations. In order to study which screw configurations can get the best mixing capability, flow fields of different configurations of gear disk and common screw elements were studied. Pressure profile and shear stress profile were calculated. The mixing ability of different flow fields was compared. The result can be concluded that alternate short mixing zones have better mixing ability than a whole long mixing zone. The simulation results of the flow field in different screw configurations of gear disk and common screw elements were verified by experiments.

机译：齿轮盘是最重要的混合螺杆元件之一。它可以满足填料在聚合物中的分布混合的需求，并且可以与其他螺杆元件以不同的配置共同旋转双螺杆挤出机。为了研究哪种螺杆配置能够获得最佳混合性能，研究了齿轮盘和普通螺杆元件不同配置的流场。计算压力分布和剪切应力分布。比较了不同流场的混合能力。结果可以得出结论，交替的短混合区比整个长混合区具有更好的混合能力。通过实验验证了齿轮盘和普通螺杆元件不同螺杆配置下流场的仿真结果。

著录项

来源
《Society of Plastics Engineers Annual Technical Conference 2005(ANTEC 2005) vol.1; 20050501-05; Boston,MA(US)》|2005年|P.355-359|共5页
会议地点 BostonMA(US)
作者
Xiuqing Ma; Shixiong Ren; Qingfeng Liu; Yanling Yin; Xiaozheng Geng;
展开▼
作者单位

Beijing University of Chemical Technology, Beijing, China, 100029;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类合成树脂与塑料工业;
关键词
twin-screw extrusion; gear disk; extrusion properties;

机译：双螺杆挤出；齿轮盘；挤出性能;

相似文献

外文文献
中文文献
专利

1. Experimental study of extruding behavior against material property in the filler mixing by intermeshing co-rotating twin screw extruder (II) [J] . Ishibashi J., Yoshikawa T., Kobayashi A. Journal of Reinforced Plastics and Composites . 1998,第13期

机译：同向旋转双螺杆挤出机相互啮合对混合料的挤出性能影响的实验研究（II）
2. Melt-mixing by novel pitched-tip kneading disks in a co-rotating twin-screw extruder [J] . Nakayama Y., Takeda E., Shigeishi T., Chemical Engineering Science . 2011,第1期

机译：在同向双螺杆挤出机中通过新型斜桨捏合盘进行熔融混合
3. The influence of screw configuration and screw speed of co-rotating twin screw extruder on the properties of products obtained by thermomechanical reclaiming of ground tire rubber [J] . Krzysztof Formela, Magdalena Cysewska, Jozef Haponiuk Polimery . 2014,第2期

机译：同向旋转双螺杆挤出机的螺杆构型和螺杆速度对磨碎的轮胎橡胶热机械回收所得产品性能的影响
4. STUDY ON THE PROPERTIES OF GEAR DISK IN CO-ROTATING TWIN SCREW EXTRUDER [C] . Xiuqing Ma, Shixiong Ren, Qingfeng Liu, Society of Plastics Engineers Annual Technical Conference . 2005

机译：共旋转双螺杆挤出机中齿轮盘的性能研究
5. Mixing studies and simulation of compounding chopped fiber and silica filler into thermoplastics in a modular co-rotating twin screw extruder. [D] . Bumm, Sug Hun. 2010

机译：在模块化同向双螺杆挤出机中将短纤维和二氧化硅填料混入热塑性塑料中的混合研究和模拟。
6. The Role of Calender Gap in Barrel and Screw Wear in Counterrotating Twin Screw Extruders [O] . Abdullah Demirci, Ismail Teke, Nickolas D. Polychronopoulos, 2021

机译：压延间隙在桶和螺杆磨损中的作用在反向双螺杆挤出机中
7. Theoretical Study on Performance of a Twin Screw Extruder. III. Three-dimensional Flow Analysis in an Intermeshing Co-rotating Self-cleaning Type Twin Screw Extruder. [O] . Lijie LIU, Yuki NAGASHIMA, Toshihisa KAJIWARA, 1997

机译：双螺杆挤出机性能的理论研究。 III。交流共旋式自清洗型双螺杆挤出机的三维流动分析。
8. Continuous Processing of Solid Propellants in Co-Rotating Twin Screw Extruders [R] . Kalyon, D. M. 1995

机译：同向旋转双螺杆挤出机中固体推进剂的连续加工

STUDY ON THE PROPERTIES OF GEAR DISK IN CO-ROTATING TWIN SCREW EXTRUDER

摘要

著录项

相似文献

相关主题

期刊订阅