• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>Symposium on Cellular Metals and Polymers; 20041012-14; Furth(DE) >Effect of Powder Blending Ratio on Pore Morphology of Combustion Processed Al-Ni Foams
【24h】

Effect of Powder Blending Ratio on Pore Morphology of Combustion Processed Al-Ni Foams

机译：粉末配比对燃烧后的Al-Ni泡沫孔隙形态的影响

获取原文
获取原文并翻译 | 示例
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

In this paper, Al-Ni foam manufactured by combustion reactions is presented. The effects of processing parameters (powder blending ratio and amount of foaming agent) on porosity and pore morphology of Al-Ni foams are discussed. The powder blending ratio of Al and Ni in the green compact is a very important factor to manufacture Al-Ni foams. The Al-Ni foams with uniform cell morphology can only be fabricated within an adequate range of the powder blending ratios. The proper amount of foaming agent can increase the porosity and the size of cells, and also stabilizes the uniformity of pore morphology. However, the excessive addition causes a severe reaction, which results in the collapse of cell walls and a decrease in porosity.
机译：本文介绍了通过燃烧反应制备的铝镍泡沫。讨论了加工参数（粉体的混合比例和发泡剂的数量）对Al-Ni泡沫的孔隙率和孔隙形态的影响。生压坯中Al和Ni的粉末混合比是制造Al-Ni泡沫的非常重要的因素。具有均匀泡孔形态的Al-Ni泡沫只能在足够的粉末混合比范围内制造。适量的发泡剂可以增加孔隙率和孔的大小，并且还可以稳定孔形态的均匀性。但是，过量添加会引起严重的反应，从而导致细胞壁塌陷和孔隙率降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号