【24h】

Fluorescent fibers coupled to monolithic photovoltaic arrays for sunlight conversion

机译:荧光纤维与单片光伏阵列耦合以进行日光转换

获取原文
获取原文并翻译 | 示例

摘要

Thin fluorescent organic fibers are used to collect short wavelength sunlight, convert it to longer wavelengths and illuminate photovoltaic (PV) arrays. Using this approach, miniature and lightweight PV arrays have been fabricated. The incoming light is collected by many fibers and mixed before reaching the PV array. Thus homogenous illumination is provided even with partially shadowed fibers, which can covet a large area and can be arranged in a form of a fabric. The PV array itself can be located in any (even dark) place. In this work we developed and tested high-performance miniature 21 mm~2 AlGaAs/GaAs monolithic arrays consisting of 6 cells connected in series. Output electric power density of 75 mW/cm2 and an open-circuit voltage about 6 V was measured outdoors for the arrays integrated with a bundle of 0.25 ― 1.00 mm thick polystyrene fibers. The influence of PV array output parameters on the fluorescent fiber diameter, length, as well as on bandgap and design of solar cells is discussed.
机译:细的荧光有机纤维用于收集短波长的阳光,将其转换为更长的波长,并照射光伏(PV)阵列。使用这种方法,已经制造出了微型轻巧的光伏阵列。进入的光被许多光纤收集并在到达PV阵列之前进行混合。因此,即使部分遮蔽的纤维也可以提供均匀的照明,这可以令人垂涎并可以以织物的形式布置。 PV阵列本身可以位于任何(甚至是黑暗的)地方。在这项工作中,我们开发并测试了由6个串联电池组成的高性能微型21 mm〜2 AlGaAs / GaAs单片阵列。在室外测量了集成了0.25〜1.00 mm厚聚苯乙烯纤维束的阵列的输出功率密度为75 mW / cm2,开路电压约为6V。讨论了光伏阵列输出参数对荧光纤维直径,长度以及带隙和太阳能电池设计的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号