【24h】

Nanoparticle-based contacts to CdTe

机译:基于纳米粒子的CdTe接触

获取原文
获取原文并翻译 | 示例

摘要

Our team has been investigating the use of particle-based contacts in CdTe solar cell technologies. Toward this end, particles of Cu-doped HgTe (Hg-Cu-Te) and Sb-Te have been applied as contacts to CdTe/CdS/SnO_2 heterostructures. These metal telluride materials were characterized by standard methods. Hg-Cu-Te particles in graphite electrodag contacts produced CdTe solar cells with efficiencies above 12percent and series resistance (R_(se)) of 6 #OMEGA# or less. Metathesis preparation of Cu(I) and Cu(II) tellurides (i.e., Cu_2Te and CuTe, respectively) were attempted as a means of characterizing the valence state of Cu in the Hg-Cu-Te ink. For Sb-Te contacts to CdTe, open circuit voltages (V_(ocS)) in excess of 800 mV were observed, however, efficiencies were limited to 9percent; perhaps a consequence of the marked increase in the R_(se) (i.e., >20 #OMEGA#) in these non-graphite containing contacts. Acetylene black was mixed into the methanolic Sb-Te colloid as a means of reducing R_(se), however, no improvement in device properties was observed.
机译:我们的团队一直在研究CdTe太阳能电池技术中基于粒子的接触的使用。为此,已经将掺杂Cu的HgTe(Hg-Cu-Te)和Sb-Te的颗粒用作CdTe / CdS / SnO_2异质结构的接触。这些金属碲化物材料通过标准方法表征。石墨电沉积接触中的Hg-Cu-Te粒子产生的CdTe太阳能电池的效率高于12%,串联电阻(R_(se))为6#OMEGA#或更小。尝试制备碲化铜(I)和碲化铜(II)(分别为Cu_2Te和CuTe)作为表征Hg-Cu-Te油墨中Cu的价态的手段。对于与CdTe的Sb-Te触点,观察到的开路电压(V_(ocS))超过800 mV,但是效率限制为9%。可能是这些不含石墨的触点中R_(se)(即> 20#OMEGA#)显着增加的结果。将乙炔黑混入甲醇Sb-Te胶体中,以降低R_(se),但未观察到器件性能的改善。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号