首页> 中文学位 >1 掺杂对0.2PZN-0.8PZT陶瓷机电性能影响;2 溶胶-凝胶法制备新型电子陶瓷及其表征
【6h】

1 掺杂对0.2PZN-0.8PZT陶瓷机电性能影响;2 溶胶-凝胶法制备新型电子陶瓷及其表征

代理获取

目录

英文文摘

论文说明:List of abbreviations and symbols

Part 1 Effect of additives on the electromechanical properties of 0.2PZN-0.8PZT ceramics

1 Effect of Cr203 addition on the structure and electrical properties of 0.2PZN-0.8PZT ceramics

1.1 Introduction

1.2 Experimental Procedure

1.3 Results and Discussion

1.4 Conclusions

References

2 Effect of MnO2 addition on the structure and electrical roperties of 0.2PZN-0.8PZT ceramics

2.1 Introduction

2.2 Experimental Procedure

2.3 Results and Discussion

2.4 Conclusions

References

3 Piezoelectric properties of new MnO2-added 0.2PZN-0.8PZT ceramics

3.1 Introduction

3.2 Experimental Procedure

3.3 Results and Discussion

3.4 Conclusions

References

4 Effect of CuO addition on the structure and electricalproperties of low firing 0.2PZN-0.8PZT ceramics

4.1 Introduction

4.2 Experimental Procedure

4.3 Results and Discussion

4.4 Conclusions

References

Part 2 Synthesis and characterization of novel ceramics by sol-gel techniques

1 Formation and transformation of ZnTiO3 prepared bysol-gel process

1.1 Introduction

1.2 Experimental Procedure

1.3 Results and Discussion

1.4 Conclusions

References

2 Synthesis and characterization of lead-free K0.5Bi0.5TiO3ferroelectrics by sol-gel techniques

2.1 Introduction

2.2 Experimental Procedure

2.3 Results and Discussion

2.4 Conclusions

References

Acknowledgements

Publications

展开▼

摘要

The postdoctoral report has been divided into two parts. In the first section, the compositional and firing properties of Pb(Zn1/3Nb2/3)0.20(Zr0.50Ti0.50)0.80O3 system(0.2PZN-0.8PZT) doped with different additives, i.e. Cr2O3, MnO2 and CuO, have been studied as well as its dielectric and piezoelectric properties. The second section describes the synthesis of two novel ABO3 type ceramics, i.e. ZnTiO3 and K0.5Bi0.5TiO3 (KBT), by sol-gel technique, and their thermal behavior and electric properties have also been investigated in detail. Cr2O3 doped 0.2PZN-0.8PZT ceramics with pure perovskite structure were fabricated by the columbite precursor method. Addition of Cr2O3 stabilized the tetragonal phase against the rhombohedral one, moving morphotropic phase boundary(MPB) composition toward the PbZrO3-rich side. The grain size was steadily enhanced when small amounts of Cr2O3 were added to system. Addition of Cr2O3above the solubility of 0.3wt% inhibited the grain growth due to accumulation of Cr ion at the grain boundary. The values of electromechanical coupling factor, kp,piezoelectric constant, d33 are optimized for 0.3wt% Cr2O3 doped samples (kp=0.70,d33=491 pC/N), which suggested that the effects of grain size plays a dominant role on improving the piezoelectric properties than that of oxygen vancancies in the low Cr2O3 doping region of 0 to 0.3wt%. However, the value of mechanical quality factor,Qm is only 140 at 0.3wt% Cr2O3, which limits their application in resonators or transformers.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号