首页>
中文期刊>
《宝钢技术研究：英文版》
>Automatic girth welding and performance evaluation of the joints of hot-induction-bend and line pipes with different wall thickness
Automatic girth welding and performance evaluation of the joints of hot-induction-bend and line pipes with different wall thickness
During the process of laying long-distance oil and gas transmission pipelines,the hot-induction-bend method is extensively used when the direction has to be changed.By considering the pipeline's ongoing processing and loading states during service,the pipeline that is generally used exhibits thicker walls than those that are observed in the line pipe.As such,during pipeline construction,hot-induction-bend and line pipes with different wall thickness are girth-welded.The chemical composition of hot-induction-bend and line pipes differs,with the carbon content being particularly higher in the hot-induction-bend pipe;it also depicts a higher carbon equivalent,which makes it possible to modify the girth of the pipe.In this study,using Baosteel's standard X70 MUOE hotinductionbend and line pipes,solid-wire automatic gas-metal-arc girth welding was performed and the performance of the girth-welded joint was evaluated.Furthermore,the weldability of the pipeline girth and the microstructure of the girth-welded joint were analyzed.The results reveal that Baosteel's standard UOE hot-induction-bend and line pipes exhibit good girth weldability,and their technical quality can be guaranteed in case of consumer fieldconstruction applications.
展开▼
