首页> 中文期刊> 《中国化学工程学报:英文版》 >Spray and mixing characteristics of liquid jet in a tubular gas-liquid atomization mixer

Spray and mixing characteristics of liquid jet in a tubular gas-liquid atomization mixer

         

摘要

For the design and optimization of a tubular gas-liquid atomization mixer,the atomization and mixing characteristics of liquid jet breakup in the limited tube space is a key problem.In this study,the primary breakup process of liquid jet columnwas analyzed by high-speed camera,then the droplet size and velocity distribution of atomized droplets were measured by Phase-Doppler anemometry(PDA).The hydrodynamic characteristics of gas flow in tubular gas-liquid atomization mixer were analyzed by computational fluid dynamics(CFD)numerical simulation.The results indicate that the liquid flow rate has little effect on the atomization droplet size and atomization pressure drop,and the gas flowrate is themain influence parameter.Under all experimental gas flowconditions,the liquid jet column undergoes a primary breakup process,forming larger liquid blocks and droplets.When the gas flow rate(Qg)is less than 127 m^(3)·h^(−1),the secondary breakup of large liquid blocks and droplets does not occur in venturi throat region.The Sauter mean diameter(SMD)of droplets measured at the outlet is more than 140μm,and the distribution is uneven.When Qg>127 m^(3)·h^(−1),the large liquid blocks and droplets have secondary breakup process at the throat region.The SMD of droplets measured at the outlet is less than 140μm,and the distribution is uniform.When 127

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号