Objective: To compare the influence of normal and degenerative discs on stress distribution of the thoracolumbar vertebrae under destructive load, explore the biomechanical background and clinical meaning and provide theoretical basis for clinical diagnosis and treatment.Methods: A mechanical model of thoracolumbar motion segment of normal and degenerative discs was built with a three dimensional finite element method and three stresses of vertical compression, compressive flexion and distractive flexion were comparatively analyzed.Results: With vertical compression and compressive flexion loads, the thoracolumbar motion segment of the normal disc showed that the central part of the upper and lower end-plates of the vertebrae and the central part of the trabecular bone adjacent to the end-plate were loaded with the most intensive stresses, meanwhile, the postero-lateral part of the annulus fibrosus was concentrated with stresses. Degenerative disc showed that the stress distribution of the trabecular bone was relatively averaged, the stresses of the central part adjacent to the end-plate were low, while at the same time, the stresses of the peripheral part were elevated relatively. With distraction flexion load, the stresses of the cortex bone, trabecular bone, end-plate and annulus fibrosus of the thoracolumbar vertebrae of degenerative discs were low, meanwhile, the stresses of the posterior structure of the vertebral body were relatively elevated compared with that of normal discs.Conclusions: There is difference in influence between normal and degenerative discs on the stress distribution of the thoracolumbar vertebrae with destructive load. The transferring way of load is changed after disc degeneration.
展开▼
