首页> 中文期刊> 《中国物理快报:英文版》 >Ramp-Wave Compression Experiment with Direct Laser Illumination on ShenGuang-Ⅲ Prototype Laser Facility

Ramp-Wave Compression Experiment with Direct Laser Illumination on ShenGuang-Ⅲ Prototype Laser Facility

         

摘要

Ramp-wave compression experiment to balance the high compression pressure generation in aluminum and x-ray blanking effect in transparent window is demonstrated with an imaging velocity interferometer system for any reflector(VISAR)on ShenGuang-Ⅲ prototype laser facility.The highest pressure is about 500 GPa after using the multilayer target design Al/Au/Al/LiF and ~10^(13)W/cm^2 laser pulse illuminated on the planar Al target,which generates the spatial uniformity to <1% over 500μm on the ablation layer.A 2-pm-thick Au layer is used to prevent the x-ray from preheating the planar ablation Al layer and window material LiF.The imaging VISAR system can be used to record the abrupt loss of the probe beam(λ= 532 nm)caused by absorption and reflection of 20-μm,30-μm and 40-μm-thick Al,i.e.,the blanking effect.Although there are slight shocks in the target,the peak pressure 500 GPa,which is the highest data up to now,is obtained with ramp-wave compression.

著录项

相似文献

  • 中文文献
  • 外文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号