• 主题
高级搜索  >
历史搜索 清空历史
首页> 中文期刊> 《工程（英文）》 >Mechanical Behavior of a Partially Encased Composite Girder with Corrugated Steel Web: Interaction of Shear and Bending

Mechanical Behavior of a Partially Encased Composite Girder with Corrugated Steel Web: Interaction of Shear and Bending

         
页面导航
  • 摘要
  • 著录项
  • 相关主题

摘要

The synergistic use of partially encased concrete and composite girders with corrugated steel webs (CGCSWs) has been proposed to avoid the buckling of corrugated steel webs and compression steel flanges under large combined shear force and bending moment in the hogging area.First,model tests were carried out on two specimens with different shear spans to investigate the mechanical behavior,including the load-carrying capacity,failure modes,flexural and shear stress distribution,and development of concrete cracking.Experimental results show that the interaction of shear force and bending moment causes the failure of specimens.The bending-to-shear ratio does not affect the shear stiffness of a composite girder in the elastic stage when concrete cracking does not exist,but significantly influences the shear stiffness after concrete cracking.In addition,composite sections in the elastic stage satisfy the assumption of the plane section under combined shear force and bending moment.However,after concrete cracking in the tension field,the normal stresses of a corrugated web in the tension area become small due to the "accordion effect," with almost zero stress at the flat panels but recognizable stress at the inclined panels.Second,three-dimensional finite-element (FE) models considering material and geometric nonlinearity were built and validated by experiments,and parametric analyses were conducted on composite girders with different lengths and heights to determine their load-carrying capacity when subjected to combined loads.Finally,an interaction formula with respect to shear and flexural strength is offered on the basis of experimental and numerical results in order to evaluate the loadcarrying capacity of such composite structures,thereby providing a reference for the design of partially encased composite girders with corrugated steel webs (PECGCSWs) under combined flexural and shear loads.

著录项

  • 来源
    《工程（英文）》 |2017年第006期|806-816|共11页
  • 作者

    Jun He; Sihao Wang; Yuqing Liu; Zhan Lyu; Chuanxi Li;

  • 作者单位

    School of Civil Engineering, Changsha University of Science and Technology, Changsha 410114, China;

    Department of Bridge Engineering, Tongji University, Shanghai 200092, China;

    Department of Bridge Engineering, Tongji University, Shanghai 200092, China;

    Department of Civil and Environmental Engineering, Imperial College London, London SW7 2AZ, UK;

    School of Civil Engineering, Changsha University of Science and Technology, Changsha 410114, China;

  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号