首页> 中文期刊> 《工程(英文)》 >An Experimental Investigation on Low Load Combustion Stability and Cold-Firing Capacity of a Gasoline Compression Ignition Engine

An Experimental Investigation on Low Load Combustion Stability and Cold-Firing Capacity of a Gasoline Compression Ignition Engine

         

摘要

Gasoline compression ignition (GCI) is one of the most promising combustion concepts to maintain low pollutant emissions and high efficiency.However,low load combustion stability and firing in cold-start operations are two major challenges for GCI combustion.Strategies including negative valve overlap (NVO),advanced injection strategies,fuel reforming,and intake preheating have been proposed in order to solve these difficulties;however,the cold start is still an obstacle.The objective of this work is to study effective methods to achieve GCI engine cold start-up.This work combines NVO,in-cylinder fuel reforming,and intake preheating to achieve quick firing under cold-start conditions and the subsequent warmup conditions.The results show that start of injection (SOI) during the intake stroke yields the best fuel economy,and injection during the compression stroke has the potential to extend the low load limit.Furthermore,SOI during the NVO period grants the ability to operate under engine conditions with cold intake air and coolant.With highly reactive products made by in-cylinder fuel reforming and fast heat accumulation in the combustion chamber,the NVO injection strategy is highly appropriate for GCI firing.An additional assisted technical method,such as intake preheating,is required to ignite the first firing cycle for a cold-start process.With the combination of NVO,in-cylinder fuel reforming,and intake preheating,the GCI engine successfully started within five combustion cycles in the experiment.After the firing process,the engine could stably operate without further intake preheating;thus,this method is appropriate for engine cold-start and warm-up.

著录项

  • 来源
    《工程(英文)》 |2019年第003期|558-567|共10页
  • 作者单位

    State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China;

    State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China;

    State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China;

    State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China;

    Guangxi Yuchai Machinery Co., Ltd., Yulin 537005, China;

  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号