首页> 中文期刊> 《地球科学前沿:英文版》 >PFC^(2D)-based investigation on the mechanical behavior of anisotropic shale under Brazilian splitting containing two parallel cracks

PFC^(2D)-based investigation on the mechanical behavior of anisotropic shale under Brazilian splitting containing two parallel cracks

         

摘要

A validated particle flow code(PFC^(2D))-based model was developed to investigate the indirect tensile mechanical behavior of shale containing two central parallel cracks under Brazilian splitting test conditions.The results show that preexisting cracks have a significant and insignificant influence on the tensile strength of shale under LPL and LVL conditions,respectively.When L≥10 mm,changing the L and H values has little effect on the tensile strength of shale.However,the inclusion of preexisting cracks have a positive effect on reducing the anisotropy of the shale specimens,and in the case of an L/D ratio of 0.3,the shale anisotropy is the lowest.Four failure modes were formed at differentβandθvalues under LPL conditions.In the case ofβ≥60°,the failure mode is mainly affected byβ,and whenβ≤45°,the failure mode is more complicated than in the case ofβ≥60°.Only three major failure modes were observed under LVL conditions;in the case of 45°≤β≤75°andθ≤30°,the most complex failure mode occurred.

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号