首页> 中文期刊> 《应用光学》 >降低微通道板输入面电极反射率的技术途径

降低微通道板输入面电极反射率的技术途径

         

摘要

为了降低透明或半透明光电阴极的光子在微通道板输入面上引起的散射噪声,通过对微通道板输入面蒸镀Ni-Cr电极后对反射率影响的定性分析以及镀膜方式、镀层厚度、电极深入通道内的深度和微通道板的开口面积比等测试分析,在兼顾微通道板对输入电极其他要求的前提下,获得了降低反射率的有效技术途径,即:采用电子束加热的蒸镀方式,用表面电阻大小来间接表征膜层厚度,使其控制在100Ω左右;电极深入通道内的深度为通道直径的35%;微通道板的开口面积比尽可能大些,可把反射率降低到4%以下,以此降低微光像增强器的光子散射噪声.%To reduce scattered noise which results from photons reflected by transparent or semitransparent photocathode at input surface of microchannel plate (MCP), the qualitative analysis of its influence on reflectance of the MCP input surface electrode and the test investigation of electrode film coating, film thickness, electrode depth, and open area ratio of MCP were given. Based on the influence of MCP input electrode on other MCP parameters, a technical solution was obtained which adopted electron gun to heat Ni-Cr alloy for electrode film coating and implemented the control of film thickness by keeping a constant resistance of l00Ω, the e-lectrode depth in channel accounted for 35% of channel diameter and the open area ratio of MCP was as larger as possible. Finally, the reflectivity of MCP input surface electrode is reduced to less than 4% and the photon scattered noise of image intensifier is decreased.

著录项

  • 来源
    《应用光学》 |2011年第2期|296-299|共4页
  • 作者单位

    北方夜视技术集团公司微光器件中心;

    西安分部;

    陕西;

    西安;

    710065;

    微光夜视技术国防科技重点实验室;

    陕西;

    西安;

    710065;

    江苏省安全生产科学研究院;

    江苏;

    南京;

    210042;

    北方夜视技术集团公司微光器件中心南京分部;

    江苏;

    南京;

    211100;

    中国人民解放军驻五二八厂军事代表室;

    江苏;

    南京;

    211106;

    北方夜视技术集团公司微光器件中心;

    西安分部;

    陕西;

    西安;

    710065;

    微光夜视技术国防科技重点实验室;

    陕西;

    西安;

    710065;

    西安应用光学研究所;

    陕西;

    西安;

    710065;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 微光技术、微光夜视仪;
  • 关键词

    微通道板; Ni-Cr电极薄膜; 反射率;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号