首页> 中文期刊> 《中南大学学报》 >Effects of various fillers on sintering, microstructures and properties of Ca-Ba-A1-B-Si-O glass/ceramic composites

Effects of various fillers on sintering, microstructures and properties of Ca-Ba-A1-B-Si-O glass/ceramic composites

         

摘要

Low-temperature sintering and properties of LTCC(low temperature co-fired ceramics) materials based on CaO-BaO-Al2O3-B2O3-SiO2 glass and various fillers such as Al2O3, silica glass, christobalite, AlN, ZrO2, MgO·SiO2, TiO2 were investigated. The results show that densification, crystallization, microstructures and dielectric properties of the composites are found to strongly depend on the type of filler. The densification process of glass/ceramic composites with various fillers is mainly from 600 °C to 925 °C, and the initial compacting temperature of samples is 600 °C. The initial rapid densification of samples starts at its glass softening temperature. LTCC compositions containing Al2O3, silica glass, AlN and MgO·SiO2 fillers start to have the crystallization peaks at 890, 903, 869 and 844 °C, respectively. The crystallization peaks are believed as correlated to the crystallization of CaAl2SiO8, β-SiO2, Ca2Al2SiO7 and β-SiO2. The composite ceramic with Al2O3, silica glass and TiO2 ceramic have a better dense structure and better smooth fracture surface. Sample for Al2O3 has the lowest dielectric loss tanδ value of 0.00091, whereas the sample for MgO·SiO2 has the highest dielectric loss tanδ value of 0.02576. The sample for TiO2 has the highest dielectric constant value of 14.46, whereas the sample for AlN has the lowest dielectric constant value of 4.61.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号